NS-2118 - Laserfiche WebLink

Home Browse Search

I I I , ORDINANCE NO. NS-2ll8 291 AUTO SERVICING AND AUTO REPAIR DESIGN AND DEVELOPMENT STANDARDS In addition to design standards the zoning standards applicable for this apply to auto body and auto repair uses: use, the following 1. A three (3) foot high berm and hedge shall be provided in the planters required along all street frontages, 2. Driveway access on through streets primarily servicing residential purposes. lots should not be allowed onto property zoned or used for 3, or repair toward 300 feet bays should residential of property Building elevations containing service not face toward a public street nor property if the elevations are within zoned or used for residential purposes. 4. A centralized utility core area should be provided containing the loading zone required by 41-417 (ii), the trash enclosure required by 41-623, utility meters, transformers and equipment rooms. Such utility core should be adjacent to and easily accessible to the servicelutility entrance of the building. 5, A six (6) foot high minimum masonry block wall shall be provided along side and rear property lines not abutting public streets. Walls or fences excluding chainlink shall not exceed 42 inches high within 15 feet of public streets. If the site abuts a commercial development, the Planning Manager may reduce or delete the wall requirement. Flowering vines should be planted at intervals along the wall to discourage grafitti. 6. Exterior building elevations facing public streets shall have a minimum of 50 percent of the storefront in clear glass. 7, A five (5) foot minimum planter should be provided around the footprint of all building elevations except at pedestrian and vehicular entrances to said building and at any building elevation abutting a landscaped perimeter yard, 8. A safe pedestrian path should be provided from the required on-site parking to the primary customer entrance. f,XHIBlI 8 f' ,