Laserfiche WebLink
Old~INANCE NS~-E214 <br />030 <br /> <br />Auto Mall Specific Development (SD-60) <br />Page 9 of 10 <br /> <br />deep channel metal backs. The metal backs may <br />be either satin anodized aluminum or baked <br />enamel steel (three inches deep). The <br />plexiglas letters are to be kept in the frame <br />with an extruded anodized aluminum 'L' molding <br />retainer. <br /> <br />(b) Maximum height of the letters to be used shall <br /> be thirty-six (36) inches. <br /> <br />E. Special Event Displays. <br /> <br />No dealership shall install or maintain or allow to be <br />installed or maintained on the property occupied by such <br />company any special event sign or display, except in <br />accordance with the following requirements: <br /> <br />(1) <br /> <br />No special event sign or display shall be permitted <br />for individual dealerships. A special event <br />signage permit shall only be issued for an Auto <br />Mall wide sales promotion. All dealerships must <br />take part in the event. <br /> <br />(2) <br /> <br />The special event sign and display shall be limited <br />to two banners per dealership and sales tents. No <br />use of flags, pennants, streamers or balloons will <br />be permitted. <br /> <br />(3) <br /> <br />The special event sign(s) or display shall not be <br />maintained for more than fourteen (14) successive <br />days. <br /> <br />(4) <br /> <br />No more than four (4) special event signs or <br />displays shall be permitted for the Auto Mall in a <br />one (1) year period. <br /> <br />Section 9. <br /> <br />Theme Decoration or Display. <br /> <br />Permanent or temporary theme decorations may be installed <br />on City light standards with Zoning Administrator's <br />approval. The decorations shall be installed on all <br />light standards within the Auto Mall. The installation <br />of decorations shall be at Auto Mall Dealership's <br />Association expense. <br /> <br />Lighting Requirements. <br /> <br />Dealership lot and street lighting standards shall be as <br />follows: <br /> <br /> <br />