TGA TRUCK DRIVING SCHOOL (REICH INDUSTRIES INC.)

Home Browse Search

B. MINIMUM SCOPE AND LIMIT OF INSURANCE Coverage shall be at least as broad as: • Commercial General Liability(CGL): Insurance Services Office Form CG 00 01 covering CGL on an "occurrence" basis, including products and completed operations, property damage, bodily injury and personal & advertising injury with limits no less than $1,000,000 per occurrence. If a general aggregate limit applies, either the general aggregate limit shall apply separately to this project/location (ISO CG 25 03 or 25 04) or the general aggregate limit shall be twice the required occurrence limit. • Automobile Liability: Insurance Services Office Form Number CA 0001 covering, Codel (any auto), or if Consultant has no owned autos, Code 8 (hired) and 9(non-owned),withlimit no less than$1,000,000 per accident for bodily injury and property damage. (Not required if CONTRACTOR provides written verification an automobile is not required to perform services.) • Workers' Compensation: as required by the State of California, with Statutory Limits, and Employer's Liability Insurance with limit of no less than $1,000,000 per accident for bodily injury or disease. (Not required if CONTRACTOR provides written verification it has no employees.) • Professional Liability (Errors and Omissions) Insurance appropriates to the Consultant's profession,with limit no less than$1,000,000 per occurrence or claim, $2,000,000 aggregate. If the Contractor maintains broader coverage and/or higher limits than the minimums shown above, the Entity requires and shall be entitled to the broader coverage and/or the higher limits maintained by the contractor.Any available insurance proceeds in excess of the specified minimum limits of insurance and coverage shall be available to the Entity. C. Other Insurance Provisions The insurance policies are to contain, or be endorsed to contain,the following provisions: Additional Insured Status The Entity;its officers,officials,employees, and volunteers are to be covered as additional insureds on the CGL policy with respect to liability arising out of work or operations performed by or on behalf of the Contractor including materials, parts, or equipment furnished in connection wall'such work or operations.' General liability coverage can be provided in the form of an endorsement to the Contractor's insurance(at least as broad as ISO Form CG 20 10 11 85 or if not available, through the addition of both CG 20 10, CG 20 26, CG 20 33, or CG 20 38; and CG 20 37 if a later edition is used). Page 12 of 19