OTIS ELEVATOR COMPANY 1 - 2003 - Laserfiche WebLink

Home Browse Search

Sr;::cifi(,~lti0ilS for th~ Po.~~ AJmini,trcltlon Buddina '" 8: Holding Facility Exhibit A Page 2 Periodically examine, clean, lubricate, adjust, and wh~n conditions warrant. repair or replace the following safety devices: Interlocks and Doors Closers Car and Counterweight Buffers Overspeed Governors, Governor Tension Sh~ave Assemblies, and Car and Counterweight Safeties Limit, Landing and Slowing Switches Door Protective Devices and Alarm Bells I 'J Conduct a yearly no-load, low speed test of car and counterweight safeties and a test of buffers. Periodically equalize the tension in all hoistway ropes. Replace all wire ropes and fastenings, when conditions warrant. Examine and when conditions warrant, regroove or repla~e all sheaves, governor tension sheaves, secondary or deflection sheaves, and compensationg sheaves. Periodically examine, lubricate, adjust, and when conditions warrant through normal wear and tear, repair or replace the following accessory equipment. Car and Corridor Operating Push-buttons Load Weighing Equipment All Hall Lanthems, Car Position and Hall Position indicators, Lobby Control Panels, Car Opreation Pannels, and all other Signal and Accessory Facilities furnished and installed as part of the whole equipment. Periodically clean all elevator machine rooms, secondary areas, elevator hoistways, and pit areas. The Contractor will be responsible for keeping the machine rooms, the exterior of the machinery, and any other parts of the equipment subject to rust, properly painted, identified, and presented to all times. During the course of each examination, all accumulated refuse in the pit areas will be discarded. Annual clean the elevator hoistway and related equipment including rails, inductors, hoistway door hangers and tracks relating devices, switches, buffers, car tops and pit areas. 20 R,vised 10/06/03