Laserfiche WebLink
<br />1.) Lead lined, flame retardant material. <br />e.) Generator remote located in front overhead console. <br />f.) Door to be 11/2" box pan construction, with <br />1.) polished stainless steel O-ring handle. <br />2.) Dual double rotary latches. <br />3.) 1 1/2" stainless steel hinge with 1/4" pin. <br />4.) Polished stainless steel drip rail. <br />5.) Gas struts to hold door open at 170 degrees. <br />6.) EPDM rubber seal around door. <br />g.) Separate fuel tank provided for unit. <br />h.) Exhaust exit out the roof of unit. <br /> <br />2.) Provide and install One (1) PANELTRONICS 120 VAC Power <br />distribution panel. <br />a.) UL listed magnetic/hydraulic switch rated circuit breakers. <br />b.) LED indicator light feature. <br />c.) Label backlighting feature. <br />d.) Digital voltmeter. <br /> <br />3.) Provide and install One Automatic transfer switch. <br />a.) Located in electric box. <br /> <br />4.) Provide and install One (1) HUBBELL shore power inlet. <br />a.) 50 Ampere capacity. Twist lock connectors. <br />b.) Cord hard-wired through 50 ampere double pole circuit breaker. <br />c.) 6' 120/240 pigtail provided. <br /> <br />5.) Provide and install One (1) ULTRA-3 75 Ampere power converter. <br />a.) produce a filtered, regulated 12VDC output with a variable input. <br />b.) Units must keep battery voltage within one (1) volt of optimum <br />charge at maximum 12VDC draw. <br />c.) Work in unity with each other without the use of external <br />isolators. <br />d.) Never "over charge" the batteries. <br />e.) Switched on 120VAC power distribution panel. <br />f.) Use of un-regulated power converters with the ability to <br />over charge batteries is not acceptable. <br /> <br />6.) Provide and install sixteen (16) LEVITON specification grade interior <br />duplex wall receptacles. <br />a.) Brushed stainless steel covers. <br />b.) Receptacles located near a source of water will be GFI rated. <br />c.) Locations are shown on attached drawings. <br />d.) Switched on 120VAC power distribution panel. <br />e.) Dedicated 15 Amp circuits. <br /> <br />5 <br />