Laserfiche WebLink
<br />d.) Relay to be placed within 18" of battery. <br />e.) Water and Explosion proof. <br /> <br />5.) Provide and install One (1) ICP solar charger kit. <br />a.) Model Pro-kit 45W. <br />b.) 45 watts, 8-10 Amp Hrsfday. <br />c.) Includes charge controller. <br /> <br />G. LIGHTING. <br /> <br />1.) Provide and install Twenty (20) THINLlTE 18" fluorescent lights. <br />a.) Located in ceiling. <br />b.) Switched from 12VDC power distribution panel. <br /> <br />2.) Provide and install Eight (8) THINLlTE 12" fluorescent lights. <br />a.) Located under overhead cabinets. <br />b.) Switched from 12VDC power distribution panel. <br /> <br />3.) Provide and install Six (6) WHELEN 810 series relampable halogen <br />light heads. <br />a.) Model 810CAOZR scene lights. <br />b.) 8" X 10" size. <br />c.) 3 on each side. <br /> <br />H. EMERGENCY LIGHTING AND EQUIPMENT. <br />NONE <br /> <br />I. WIRING REQUIREMENTS. <br /> <br />1.) Terminals to conform to MIL-T-7928 and MS 25036. <br />a.) Terminals to be crimped with tool recommended by <br />manufacturer and per MIL-SPEC. <br />b.) Spade and hook terminals are unacceptable. <br /> <br />2.) All wiring to be supported with insulated clamps complying <br />with MS 21919. <br /> <br />3.)Wire bundles to be tied with trimmed nylon cable ties. <br /> <br />4.) All added DC electrical circuits to be protected by resettable circuit <br />breakers rated for 125% of circuit load. <br /> <br />5.) Full wiring schematics are to be provided. <br />a.) 120 VAC main and branch distribution. <br /> <br />7 <br />