Laserfiche WebLink
<br />Amendment Application No. 2003-03 <br />Zoning Ordinance Amendment 2003-03 <br />March 22, 2004 <br />Page 3 <br /> <br />Zoning Ordinance Amendment <br /> <br />The Auto Mall specific development will be updated to address setback, <br />landscape and design issues. In addition, the Auto Mall Architectural <br />and Design Standards have been incorporated into the SD document. With <br />this consolidation, Specific Development No. 60 will become the primary <br />document that governs activity in the Auto Mall (Exhibit 3). The <br />highlights of the changes proposed within Specific Development No. 60 <br />are listed below. <br /> <br />Uses Permitted/Conditionally Permitted <br /> <br />The current SD document does not allow parking structures. Under the <br />proposed SD, parking structures up to and including three levels and not <br />exceeding 40 feet in height will be allowed by right. Four and five- <br />story structures up to a height of 60 feet will require a conditional <br />use permit. These parking structures are intended to be used to store <br />dealer inventory. <br /> <br />After further review subsequent to the March 8 Planning Commission study <br />session, staff will recommend that new car leasing offices not in <br />conjunction with a new car dealership continue to be allowed with a <br />conditional use permit. Further, staff recommends that car leasing <br />offices that operate in conjunction with a dealership continue to be <br />allowed by right. <br /> <br />Sales of motorcycles and all-terrain vehicles is currently an allowed <br />use in SD-60 but is limited to a specific parcel that is currently being <br />used as a storage lot for dealer inventory. The SD is proposed to be <br />modified to allow motorcycle and personal watercraft (i.e. wave runners) <br />dealerships along the Edinger Avenue frontage only. <br /> <br />Additionally, there are numerous uses allowed in the Auto Mall that are <br />no longer appropriate within the setting of the Auto Mall and are <br />proposed to be deleted. These include: <br /> <br />. Research and development facilities <br />. Professional and administrative offices <br />. The assembly or packaging of products <br />materials <br />. Auto detailing <br /> <br />from previously prepared <br /> <br />758-28 <br />