PACIFIC COAST CABLING 3 - 2004 - Laserfiche WebLink

Home Browse Search

APPENDIX A (Concluded) Proposal Response Form Sam Die Job #2: Scope of Work: Contractor shall provide and install one (1216)-multi-mode / single mode, fiber optic cable running from the basement Equipment Room ERB.2 to the ath floor Telecommunications Closet TCa.1. Fiber optic cable will terminate in ERB.2 onto an appropriately configured Lucent LGX Fiber Optic Distribution System, using an LST1 U- 072/7 shelf with ST-type connectors. In TCa.1, fiber optic cable should terminate onto an appropriately configured Lucent Sliding Combination Shelf, using a 600B2 One-Unit High type shelf with ST-type connectors. Rack space required exists at both termination points. One, empty 4-inch conduit exists between ERB.2 and TCB.1 (the Basement Telecommunications Closet that is vertically stacked with the rest of the floors including our destination closet, TCa.1). Contractor shall provide and install (4) one inch, non- plenum, corrugated innerduct from ERB.2 to TCB.1 via existing 4-inch conduit noted above which is 150 ft in length. At exit pOint of conduit, transition (1) of (4) installed innerduct to (1) one inch, riser-rated, corrugated innerduct, which will traverse from the basement, stacked Telecommunications Closet, TCB.1, up to TC8.1. Contractor shall provide (1) 4-inch core hole between TCB.1 and TC1.1. Building Facilities Management has determined that floor is clear of obstruction for 4-inch core. Core hole shall be sleeved, and fire stopped per local, state, and industry standard codes. 1) Provide a breakdown of hours to be billed. 2) Provide a breakdown of cost of materials. 3) Provide details and amounts of any and all other charges that would be billed to the City. 4) Provide approximation of elapsed time to complete work, beginning from authorization to final acceptance. Page 22 of 35