Laserfiche WebLink
<br />1.6.4.2.Horizontal panels: <br />Black in color. <br /> <br />CPI Universal Horizontal Cable Manager - <br /> <br />1.6.4.2.1. Double Rack Space: <br /> <br />CPI Part # 30130-719 <br /> <br />1.6.4.2.2. Triple Rack Space: <br /> <br />CPI Part # 30131-719 <br /> <br />1.6.4.2.3. Seven (7) foot open frame relay rack: <br /> <br />1.6.4.2.3.l.Install double-space panels at the top of each installed <br />seven (7) foot data equipment rack and triple-space panels in <br />other locations. <br /> <br />1.6.4.2.4. Twenty-four (24), thirty-six (36), or fourty-eight (48) inch open <br />frame rack: <br /> <br />1.6.4.2.4.l.Install double-space panels only. <br /> <br />1.7. EQUIPMENT RACKS <br /> <br />1.7.1. Provide required 7 ft. high, 19" finished aluminum, equipment rack(s) and <br />rack hardware assemblies. Comply with the following: <br /> <br />1.7. 1. I.For each rack, provide (2) panel mounted, UL listed, 15 AMP, 110/120 <br />VAC power strips, with circuit breaker, a minimum of six outlets and an <br />8 ft. power cord with NEMA 5-15P plug. <br /> <br />1.7.1.2.For each rack, provide rack mounted ground bar. <br /> <br />1.7.1.3.Provide required horizontal and vertical cable management panels. <br /> <br />1.7.1.4.Provide all required earthquake bracing hardware. <br /> <br />1.8. CABLE PATHWAY AND SUPPORT HARDWARE <br /> <br />1.8.1. Provide all riser-rated innerduct for fiber backbone cable installation. <br /> <br />1.8.2. Provide all required trade size 12" and 18" cable rack (ladder rack) to <br />allow for proper routing of horizontal, or backbone cabling. Build out of <br />ladder racks subject to individual project requirements and scope of work. <br />Comply with the following: <br /> <br />1.8.2.1.Finish: Telco Gray <br /> <br />1.8.2.2.Provide manufacturer's standard lengths. <br /> <br />Page 7 of 24 <br />