SecSol - Laserfiche WebLink

Home Browse Search

SECTION 01300 — CONTRACTOR SUBMITTALS PART 1 — GENERAL 1.1 GENERAL A. Wherever submittals are required hereunder, all such submittals by the CONTRACTOR shall be submitted to the ENGINEER. 1.2 PRECONSTRUCTION CONFERENCE SUBMITTALS A. At the preconstruction conference referred to in Section 01010, "Summary of Work," the CONTRACTOR shall submit the following items to the ENGINEER for review: A preliminary schedule of Shop Drawings, Samples, and proposed Substitute ("Or -Equal") submittals listed in the Bid. 2. A list of all permits and licenses the CONTRACTOR shall obtain indicating the agency required to grant the permit, the expected date of submittal for the permit, and required date for receipt of the permit. 1.3 SHOP DRAWINGS A. Wherever called for in the Contract Documents, or where required by the ENGINEER, the CONTRACTOR shall furnish to the ENGINEER for review, three (3) copies of each shop drawing submittal. The term "Shop Drawings" as used herein shall be understood to include detail design calculations, shop drawings, fabrication, and installation drawings, erection drawings, list, graphs, catalog sheets, data sheets, and similar items. Whenever the CONTRACTOR is required to submit design calculations as part of a submittal, such calculations shall bear the signature and seal of an engineer registered in the appropriate branch and in the state wherein the project is to be built, unless otherwise directed. B. All Shop Drawing submittals shall be accompanied by the CONTRACTOR's standard submittal transmittal form. C. Normally, a separate transmittal form shall be used for each specific item or class of material or equipment for which a submittal is required. Transmittal of a submittal of various items using a single transmittal form will be permitted only when the items taken together constitute a manufacturer's "package" or are so functionally related that expediency indicates review of the group or package as a whole. A multiple -page submittal shall be collated into sets, and each set shall be stapled or bound, as appropriate, prior to transmittal to the ENGINEER. D. Except as may otherwise be indicated herein, the ENGINEER will return review comments on each submittal to the CONTRACTOR with its comments noted thereon, within 30 calendar days following their receipt by the ENGINEER. It is considered reasonable that the CONTRACTOR shall make a complete and acceptable submittal to the ENGINEER by the second submission of a submittal item. The CITY reserves the right to withhold monies due to the CONTRACTOR to cover additional costs of City of Santa Ana Contractor Submittals Security Management System Project Page 01300-1 SantaAn2_SMS_01300