Laserfiche WebLink
Metadata
Document management portal powered by Laserfiche WebLink 9 © 1998-2015 Laserfiche. All rights reserved.
a. Wire and piping sizes and types to existing and new field devices. <br />b. Conduits in which wiring is to be located. <br />C. Panel (e.g., Camera, etc.) termination strip numbers. <br />d. Location, functional name, and manufacturers designation of items to <br />which wiring and piping are connected. <br />11. Drawings showing schematic diagrams for all circuits. Complete details on the <br />circuit interrelationship of all devices within and outside each panel shall be <br />submitted using schematic diagrams. The diagrams shall show numbered <br />terminals on components together with the unique number of the wire to be <br />connected to each terminal. The diagrams shall also show terminal assignments <br />from all primary devices, such as cameras. The CONTRACTOR shall furnish all <br />necessary equipment suppliers' shop drawings to facilitate inclusion of this <br />information by the SMS Supplier. <br />12. Complete and detailed bills of materials: A bill of material list, including quantity, <br />description, manufacturer, and part number, shall be submitted for each field <br />mounted device or assembly, cabinet assemblies and subassemblies. Bills of <br />material shall include all items within an enclosure. <br />13. Data sheets for each component, together with a technical product brochure or <br />bulletin: The data sheets shall show: <br />a. Component functional description used herein and on the Drawings; <br />b. Manufacturer's model number or other product designation; <br />C. Project tag number used herein and on the Drawings; <br />d. Project system of which the component is a part; <br />e. Project location or assembly at which the component is to be installed; <br />f. Input and output characteristics; <br />g. Requirements for electric supply (if any); <br />h. Special requirements or features, such as specifications for ambient <br />operating conditions. <br />i. Features and options which are furnished. <br />14. A separate technical brochure or bulletin shall be included with each data sheet. <br />Each brochure or bulletin shall include a list of tag numbers for which it applies. <br />Special options and features, which are furnished, shall be identified. <br />15. Calibration, adjustment and test details for all components and systems. <br />City of Santa Ana Security Management System General Requirements <br />Security Management System Project Page 17010-6 <br />SantaAna_SMS_17010 <br />