Laserfiche WebLink
<br />Attachment B <br /> <br />, LDV, Inc. <br />LDVa 180 Industrial Drive <br />Burlington, WI 53105 <br />800.558.5986 <br />Fax 262.763.0156 <br />www.ldvusa.com <br />Section Qty <br />15.09 1 Sony UP-20 (or current model) A6 color video printer with UPC-21 L - L size standard color print <br /> pack (4 x 50 packs) (5 in. x 3.6 in.). Product features: <br /> . 400 dpi resolution. <br /> . 4 frame memory. <br /> . Analog video inputs and outputs. <br /> . RS-232C interface. <br /> . Monitor loop-through. <br />15.10 1 Drake RMM4 (or current model) mini rack housing with power supply for up to 4 Drake video <br /> modulators. <br />15.11 1 Drake RMM 12 (or current model) rack housing for up to 12 Drake video modulators. Includes <br /> Drake PS121 air cooled power supply. <br />15.12 12 Drake VMM860 (or current model) video modulator for RMM12 rack. <br />15.13 4 Drake DMM806 (or current model) video demodulator for RMM12 rack. <br />15.14 2 Drake PC1201 (or current model) twelve-input passive combiner. <br />15.15 <br /> Prewire and make installation provisions for customer owned microwave receive system. Includes: <br /> . Installation of microwave receiver and integration into vehicle AN system. <br /> . Installation of microwave receive antenna on roof. Note: Depending on antenna type and size a <br /> dedicated mast may be required, a mast dedicated for antenna is not included unless specified in <br /> MAST AND MAST MOUNTED EOUIPMENT section. <br />15.16 All RF cable for DSS antenna systems (when specified) shall be Belden #9116 series 6 broadband <br /> coaxial cable. All other video cabling shall be Belden #1505A RG-59/U precision video cable. <br />16.00 MAST AND MAST MOUNTED EQUIPMENT: <br />16.01 1 Will-Burl model TMD-6-25-367 25-ft. heavy-duty non-locking interior telescoping pneumatic mast <br /> with the following: <br /> 1. 2-gal., 1/2-hp Thomas Ultra Air-Pac tank and compressor. <br /> 2. Airline filter, lubricator and regulator. <br /> 3. Control valve and dump valve. <br /> 4. Will-Burl magnetic mast extension warning kit with warning light at mast control location and at <br /> drivers location. <br /> 5. 40-ft of Nycoil to enclose cabling to top of mast. <br /> 6. Fabricated aluminum mast bucket with drain tube installed in the bottom to hold the nycoil. <br /> 7. Will-Burl through-body mount installed in the bottom of the mast bucket. <br /> 8. Interlock to prevent movina the vehicle with mast raised. <br />16.02 1 Will-Burl D-TEC mast safety system mounted on mast. System features: <br /> . High voltage sensor aides operator in detecting overhead power lines. <br /> . Anti-collision sensor automatically stops mast extension, assisting operator in detecting overhead <br /> obstructions. <br /> . Tilt sensor ensures that vehicle is level and D-TEC is pointing directly upward prior to mast <br /> extension. <br /> . 35 watt auartz haloaen look-up spot liaht to illuminate area directly above mast. <br /> <br />Copy of Huntington Beach Police Department (CA) MCC30LLC260-0~3 MS.xls <br /> <br />6/16/2005 <br />