MOTOROLA, INC. 2 - 2005 - Laserfiche WebLink

Home Browse Search

of Santa Ana Exhibit C -3 Statement of Work 1.4 Site Survey /Site Preparation In order to ensure the computer room(s) and other locations are appropriate for the installation of the system hardware, a survey of the Customer's facilities will be conducted. 1.4.1 Motorola Responsibilities a. Conduct a site survey /audit of the facilities in which system hardware will be installed to assess site readiness. b. Prepare a report that includes recommendations for any site preparation required to provide a suitable environment for installation of the system equipment. c. Advise the Customer of any deficiencies related to power, power supplies, cabling, network connectivity, communications equipment that are identified. 1.4.2 Customer Responsibilities a. Provide a site adequate for the installation, operation, and maintenance of all computer server(s), workstation(s), and related peripheral equipment. The space provided for the equipment cabinet will be adjacent to and in line with the computer equipment cabinets. Space will be provided in the front and rear (minimum 36" in front and rear) of all cabinets to allow room for installation and maintenance of components and wiring. These facilities will be made available at least two (2) weeks prior to the scheduled installation dates to allow for timely installation. b. Provide appropriate power and power distribution units in each equipment room. Power will be generator- backed, auto - switching, with frequency and voltage consistent and stable to within defined limits of the UPS selected. AC power is to be generator - backed, UPS power with minimum two -state EMP protection. Provide all generators and first two -stage EMP protection. c. Provide surge protected AC power strips for each workstation. Provide one standard AC power outlet (grounded) within four cable feet of the monitors and system unit located within each console. Each position should be on a separate breaker to limit the number of positions affected by the loss of a single circuit. Power requirements for the largest three- monitor console position is 1,500 watts, inductive. No more than 3 consoles should share the same circuit to minimize the number of workstations affected by individual breaker activation. d. Provide a minimum of one 15 -amp grounded AC power outlet in each office space that requires the placement of workstations and/or printers. Each terminal requires 700 watts inductive and each printer requires 500 watts inductive. Exhibit C -3, Statement of Work Page C3 - 5 0512/05 CN: 05 -17505 This document contains Motorola and Motorola confidential, proprietary, and trade secret information and may not be shared with any person or agency not directly associated with the city of Santa Ana without the express written consent of Motorola, Inc., or its designees.