Laserfiche WebLink
External System <br />The Zetron 26 acts as a centralized controller to the model 26. The model 26 will <br />Interface <br />interface to the model 6. The interface between the two devices is not the <br />res onsibilit of TriTech software systems. <br />Protocols <br />The connection to the Zetron Model 26 is a serial part connection. The connection <br />will be made through a DB9 connector with a three wire transmit and receive with <br />ground. The transfer rate is between 4800 and 9600 Baud. The cable plugs into <br />the CAD/printer port on the Zetron Model 26 <br />WA <br />TriTech Tasks <br />. Perform requirements capturing and review of the suggested interface design. <br />• Provide an interface requirements document (IRD) which describes the <br />features and functionality of this interface. <br />• Provide system administration training for the configuration of the Zetron 26 <br />interface to TriTech VisiCAD <br />• Provide the initial installation and configuration of the Zetron 26 interface. <br />• Perform Acceptance Test Procedures. The subject matter of the ATP will be <br />the functionality described within the ]RD. <br />City Tasks <br />. Provide TriTech with the Model 6 vehicle positions. <br />• All hardware and configuration of the Zetron model 26 and 6 <br />• Review and sign off on all IRD's related to this interface. <br />• Participate with Acceptance Testing Procedures. <br />Comments <br />