SECURITY SOLUTIONS, INC. 2 - Laserfiche WebLink

Home Browse Search

B. The CONTRACTOR shall submit complete material lists for the work of this Section. Such lists shall state manufacturer and brand name of each item or class of material. C. Catalog data shall be submitted to supplement all shop drawings. Catalog cuts, bulletins, brochures, or the like or photocopies of applicable pages thereof shall be submitted for mass produced, non - custom manufactured material. These catalog data sheets shall be stamped to indicate the project name, applicable Specification section and paragraph, model number, and options. This information shall be marked in spaces designated for such data in the stamp. D. Materials and Equipment Schedules: The CONTRACTOR shall deliver to the ENGINEER within 30 days, a complete list of all materials, equipment, apparatus, and fixtures which it proposes to use. The list shall include type, sizes, names of manufacturers, catalog numbers, and such other information required to identify the items. E. Record Drawings: In addition to the Record Drawings as a part of the record drawing requirements specified in Section 01300 - Contractor Submittals, the CONTRACTOR shall show depths and routing of all duct bank concealed below -grade electrical installations. Said set of record drawings shall be available to the ENGINEER during construction. After final inspection, the CONTRACTOR shall transfer all record drawing information using a red pen to a set of bluelines, which shall then be delivered to the ENGINEER. In addition, the Record Drawings shall show all variations between the work as actually constructed and as originally shown on the Drawings, based upon information supplied by the CONTRACTOR. 1.5 QUALITY ASSURANCE A. Field Control of Location and Arrangement: The Drawings diagrammatically indicate the desired location and arrangement of outlets, conduit runs, equipment, and other items. Exact locations shall be determined by the CONTRACTOR in the field based on the physical size and arrangement of equipment, finished elevations, and other obstructions. Locations shown on the Drawings, however, shall be adhered to as closely as possible. B. All conduit and equipment shall be installed in such a manner as to avoid all obstructions and to preserve headroom and keep openings and passageways clear. Where the Drawings do not indicate exact locations, such locations shall be obtained from the ENGINEER. Where equipment is installed without instruction and must be moved, it shall be moved without additional cost to the CITY. C. Workmanship: All materials and equipment shall be installed in accordance with printed recommendations of the manufacturer, which have been reviewed by the ENGINEER. Workmen skilled in this type of work shall accomplish the installation and installation shall be coordinated in the field with other trades so that interferences are avoided. D. All work, including installation, connection, calibration, testing, adjustment, and paint touch -up, shall be accomplished by qualified, experienced personnel working under City of Santa Ana Basic Electrical Requirements Security Management System Project Page 16010 -2 SantaAna_SMS_16010