31A - 1403 3/4 NORTH TUSTIN - Laserfiche WebLink

Home Browse Search

c. Branches should exceed all antennas by a minimum of 12 inches. d. Branches should start at 15 feet above the ground. e. There should be a minimum space of seven feet between the top of the antenna and the top of the branches. f. Branches should have an upward sweep similar to that of actual Canary Island Pines. g. Branch foliage color should be an olive green with some brown "needles" to match an actual Canary Island Pine. A sample should be submitted for approval prior to fabrication. h. Full bark cladding with a custom color should be submitted for approval prior to fabrication. i. All antennas shall be covered with "pine antenna socks" that match the approved foliage color. j. All "stand-off mounts" and support pipe mounts shall be concealed behind antennas and painted a darker shade of green (or black) with a "flat" paint finish to reduce reflection and visibility of the mounting. k. Include the tree specifications (selected manufacturers and models) with photo simulations (also a site plan review requirement). I. Show the location of the GPS antenna on all elevations. m. Provide a "unistrut" detail for the utility cabinet; an "H-frame" is not acceptable. n. Provide a note on the plans stating "install underground utilities sleeving for two carriers during construction of the structure". The sleeving should go underground through the caisson; shrouds on the outside of the pole are not acceptable. All utilities, coaxial and conduit for the project should be designed to be underground; this shall eliminate the need for an "ice bridge". o. All exterior conduit and electrical meters shall be installed and screened in one metal enclosure painted to match the structure. p. A temporary cell on wheels (COW) shall be permitted during the replacement of the existing pole with the new pole structure. The Resolution No. 2007-13 31 A-16 Page 5 of 7