Laserfiche WebLink
4.7 BUILDING SETBACKS <br />A. Setback area requirements facilitate the incorporation <br />of publicly accessible open space while reinforcing a <br />continuous urban street frontage that defines the street <br />edge. Setback requirements are designed as a range <br />so that variety may be achieved in the public/private <br />interface area depending on the site and building design <br />and its relationship to adjacent developments. Setbacks <br />are designed to coordinate with the public improvements <br />identified in the Metro East Public Realm Amenity Plan <br />IAppendixj. New development within the MEMU Overlay <br />Zone shall be designed to provide setback areas as <br />follows: <br />1 . Neighborhood Transitional District <br />Front: 0-10 Ft <br />Side: 0-10 Ft <br />Rear: 0-10 Ft <br />2. Village Center District <br />Front: 0-20 Ft <br />Side: 0-10 Ft <br />Rear: 0-10 Ft <br />3. Active Urban District <br />Front: 0-20 Ft <br />Side: 0-10 Ft <br />Rear: 0-10 Ft <br />Any new development that is ten stories or greater in the <br />Active Urban District at a location adjacent to an existing <br />multiple-family residential use or zone outside of the MEMU <br />Overlay Zone boundaries shall be set back at least 150' <br />from the property line of the adjacent residentially used or <br />zoned property. <br />4. Office District <br />Front: 0-20 Ft <br />Side: 0-20 Ft <br />Rear: 0-20 Ft <br />B. In addition to the above setback requirements, the <br />following provisions shall also apply to new development <br />projects: <br />In order to encourage flexibility and provide an <br />organic feel in the design and building-street <br />interaction, there is no minimum setback requirement <br />within the MEMU Overlay Zone, with the exception <br />that all structures shall maintain the maximum rear <br />setback specified if the property abutting on the rear <br />property line is developed solely as a residential use. <br />2. Setbacks abutting public rightsof-way may be further <br />recessed from the maximum setback specified for the <br />purposes of a public open space, dining/gathering <br />or special entry area. These areas may not satisfy <br />private open space requirements. <br />3. Setbacks abutting public rights of-way shall be <br />landscaped with lawn, trees, shrubs, or other plants <br />and/or decorated as a hard surface expansion <br />of the sidewalk. A combination of landscape and <br />hardscape materials shall be provided as follows: <br />a. Hardscape paving may include brick, stone, <br />interlocking concrete pavers, textured concrete, and/ <br />or impressed patterned concrete. Hardscape elements <br />shall also be provided when setback area is being <br />used to satisfy publicly accessible open space areas. <br />These elements may include, but are not limited to, <br />seating areas, potted plant materials, water features, <br />and public art installations. <br />b. The balance of the setback areas shall be landscaped <br />with turf, shrubs, or groundcover, and trees. All plant <br />materials shall be in proportion to the height and <br />mass of the building, and shall be permanently <br />maintained. <br />Upper level setback <br />areas incorporating <br />terraces and roof <br />decks <br />75B-117 <br />