Laserfiche WebLink
<br />Procedures (by station): Check stations to be established: <br /> <br />o ToolfEquipment Drop: Place all tools, which will be used again, in contaminated tool, drop area. <br /> <br />o Gross Decon: Remove as much of the heave contamination as possible by scraping or other <br />physical means without use ofsolvents/solutions (dry decon only). <br /> <br />o SCBA/Respirator: If exiting to replace SCBA cylinder or air purifying cartridges enter area <br />free of airborne hazards and replace or exchange used cylinder/cartridge. Place used cylinder <br />in equipment decon. Disposes of cartridge in decon container. <br /> <br />o Outer equipment removal: If SCBA is to be removed, slip out of harness but do not remove face <br />piece until in an area free of airborne hazards. Outer globes and outer boots are to be <br />removed/washed as necessary. <br /> <br />o Remove protective clothing: Remove tyvex/sarnex coveralls turning inside out as they are <br />removed. Place in decon waster container for disposal. Nomex coveralls may be placed in <br />container for washing/laundering. <br /> <br />o Hand-wash/clean-up: Use commercial hand cleaner and/or soap and water to wash hands, etc. <br />prior to exiting. <br /> <br />o <br /> <br />Other: <br /> <br />31 <br />