25F - JANITORIAL SVCS - Laserfiche WebLink

Home Browse Search

be picked up and stored in the proper janitor room once the condition no longer exists to warrant such signs. 5.3.31 Weeklv, Clean Two (2) Police Lunchroom Refrigerators• (One refrigerator - on Mondays, one refrigerator - on Fridays). Clean interior and exterior of refrigerator surfaces. Dispose of all foods and temporary plastic containers. Do not dispose of permanent containers, such as those made of glass or metal. Empty contents of permanent containers, wash them and leave the permanent containers in the designated lunchroom area. 5.3.32 Weeklv Spray Buffing of Hard Floors: Clean and restore a uniform gloss and protective finish to resilient the or terrazzo floors that are finished with a floor finish. All chairs, trash receptacles, etc. shall be tilted or moved where necessary to spray buff underneath. The entire floor shall have a uniform, glossy appearance, free of scuff marks, heel marks, and other stains, and shall have a uniform coating of floor finish. All spray buff solution shall be removed from baseboards, furniture, trash receptacles, etc. 5.3.33 Weeklv Dusting of Blinds and Draperies: Clean all blinds, shades, and draperies. Care shall be taken not to spread dust into the air. 5.3.34 Weeklv Dusting of Ceiline, Atrium ledges Lunchroom drywall ledges and Wall HVAC Vents: Clean all HVAC vents and area immediately surrounding them. Dust all atrium ledges at the glass/wood railing areas and at the atrium stairs. Dust lunchroom drywall ledges. Care shall be taken not to spread dust into the air. 5.3.35 Weeklv High Dusting: Remove dust, cobwebs, oily film, etc., from all fixtures and surfaces above 11 feet from the top of the floor. This includes lights, grills, light fixtures, pipes, sprinkler system, cables, ledges, walls, atrium wood and ledges, ceilings, vents, etc. Care shall be taken not to spread dust into the air. 5.3.36 Monthly Machine Scrubbing of Glazed Tile and Stone Floors• Deep cleaning to be performed in a manner to remove heavy stains, mildew and mineral deposits from the surface. After scrubbing, the surface shall be rinsed thoroughly to remove all remaining cleaning solution. After cleaning, the floor and grout shall have a uniform appearance free from film, mineral deposits, corrosion stains, etc. Areas not accessible with the buffer shall be manually scrubbed with an abrasive pad. Apply sealer to the areas, after machine scrubbing except in shower areas. 5.3.37 Quarterly Re-waxing Vinyl & Tile Floors: If there are black marks, marks from chair glides, or imbedded soil in the finish, they shall be removed before re-waxing. A uniform coat of approved floor finish shall be applied. After the finish has dried, the appearance shall be uniform with no visible stress marks, swirls, etc. Remove all stripping or detergent solution from the baseboards, door or other non-floor surfaces and in adjacent spaces. 18 25F-20