ECONOLITE TRAFFIC ENGINEERING AND MAINTENANCE, INC. 2 -2008

Home Browse Search

· Separate pricing is requested for replacing all conduit with 1 Y2-inch conduit installed 18 to 36 inches below grade. . Remove potheads from street light poles as work progresses. . Remove all pull boxes except for required boxes as work progresses. . Install new globes. · This is a working system; system must be de-energized each morning and re- energized each afternoon. Contractor is responsible for keeping street lighting system operational. . Lockout/tagout is required. . Proper disposal or recycling of hazardous materials is required. . Work shall start from the service point and proceed to completion of one circuit prior to starting work on another circuit. · All connections must be made by the end of each day as the system shall be energized each evening. At no time can a cable be left unconnected prior to energizing. . All return lines must be separate and identifiable. . A sketch of a typical cable replacement is attached. The City acknowledges the complexity of this project, the scope of work requested and that unforeseen work may be required during the scope of the project. A map showing street light locations and service points is attached to this proposal (EXHffiIT A-I). Funding will be allocated over a three or four year period until the work is completed. The City, at the discretion of the Director, reserves the right to decrease the scope of work during the duration of the agreement The Contractor shall provide at his own risk and cost all labor, materials, tools, equipment, traffic control and miscellaneous devices, transportation, hauling, dumping, recycling of construction and demolition material, and proper disposal and/or recycling of hazardous materials as part of this project. II. APPROVED MATERIALS A. CONDUIT 1. Rigid, nonmetallic electrical conduit 2. Sizes: I" 1 1,4" 1 Y2" 2" 3. Fittings to match conduit sizes B. CONDUCTORS 1. A WG wire size #8 solid copper wire. 13