Laserfiche WebLink
• Equipment engines shall be maintained in good condition and in proper <br />tune according manufacturer's specifications. <br />• To the extent feasible, construction equipment shall use alternative <br />clean fuels such as compressed natural gas equipment with oxidation <br />catalysts. If alternative clean fuels are not feasible, gasoline powered <br />construction equipment shall be used. <br />• Construction equipment operating on diesel fuel shall use particulate <br />filters or low sulfur diesel. <br />• To the extent feasible construction operations shall use electricity from <br />power poles in-lieu of temporary diesel or gasoline-powered <br />generators. <br />36. Prior to commencement of construction activities, the project developer shall <br />identify to the City a construction relations officer to act as a community <br />liaison concerning on-site activity, including resolution of issues related to <br />dust generation from grading/paving activities. A publicly visible sign shall <br />be posted with the name of construction relations officer and a telephone <br />number. <br />37. During finish work, the construction contractor shall ensure the minimization <br />of ROG emissions. Building plans for the project shall specify and require <br />the use of pre-coated building materials, use of high pressure-low volume <br />(HPL~ paint applicators with 50 percent efficiency, and use of lower <br />volatility paint not to exceed 100 grams of ROG per liter. <br />38. During construction and grading activities, the developer's construction <br />contractor shall comply with the measures set forth in the Storm Water <br />Pollution Prevention Plan (SWPPP) to ensure that airborne dust is kept to a <br />minimum. <br />39. Prior to issuance of building permits and to the extent feasible, building plans <br />for the proposed project shall reflect the use of the following measures. <br />• Use low-polluting high energy-efficient appliances <br />• Install solar panels on roofs to supply electricity for heating and cooling <br />• Use double-paned windows to reduce thermal loss <br />• Install automatic lighting on/off controls and energy-efficient lighting <br />• Use light colored roofing materials in new construction to deflect heat <br />away from buildings. <br />40. During grading operations, special handling of on-site soils shall be <br />required due to the high moisture content of the soils, which is well above <br />optimum moisture conditions. The City of Santa Ana shall monitor the <br />Resolution No. 2009-022 <br />Page 11 of 20 <br />