Laserfiche WebLink
the instructions given by the Telecommunications Coordinator. Comply with <br />the following: <br />2.8.13.1. Use non-erasable labels. <br />2.8.13.2. Labels must be typed or printed. Hand-written labels are not <br />acceptable. <br />2.8.13.3. Label material shall meet EIA/TIA 606A Standards. <br />2.9. TERMINATION OF COMMUNICATIONS CABLE <br />2.9.1. Terminate UTP backbone cable on 110-type punch blocks per drawings. <br />Punch block termination is industry standard punch down by pair, color <br />code, and pin/pair assignment. <br />2.9.2. Work area UTP terminations shall comply with ANI/EIA/TIA 568A. <br />Comply with the following: <br />2.9.2.1.Terminate Category 5e data cables on 8 position, 8 conductor <br />Information Outlet connectors at work area outlet and <br />Telecommunications Closet patch panel ports. Category 5e cable <br />terminations shall comply with the 5686 Standard. <br />2.9.2.2.Terminate Category 5e voice cables on 8 position, 8 conductor <br />Information Outlet connectors at work area outlet. Category 5e cable <br />terminations shall comply with the 5688 Standard. Terminate <br />Telecommunications Closet end of Category 5e cable on 110-type <br />punch blocks. Punch block termination is Industry Standard punch <br />down by pair, color code, and pin/pair assignment. <br />2.9.3. Label backboards, punch blocks, punch block ports, patch panels, patch <br />panel ports, and Information Outlets according to the specifications noted <br />herein, or as per instructions from the Telecommunications Coordinator. <br />The numbering shall be in accordance to the numbering scheme currently <br />used by the City and comply with the following: <br />2.9.3.1.Use non-erasable labels. <br />2.9.3.2.Labels must be typed or printed. Hand-written labels are not <br />acceptable. <br />2.9.3.3.Label material shall meet EIA/TIA 606A Standards. <br />2.10. TESTING AND CERTIFICATION <br />Page 16 of 24 <br />