Laserfiche WebLink
4.2 Pitchers Mound/Home PlateBase path Areas <br /> 4.2.1 When adding a mix with a higher clay composition material to any <br /> pitcher's mound/home plate/base-path area, where a spoz-t turf infield exists, the specific <br /> type of material to be used is: Hill Topper Home Plate and Mound Mix by Stabilizer <br /> Solutions. <br /> 4.2.2 When adding a mix with a higher clay composition material to any <br /> pitcher's mound/home plate base-path area, where a skinned infield exists, the specific <br /> type of material to be used is: Ballyard with Stabilizer by Stabilizer Solutions. ~ <br /> <br /> 5.0 Equipment <br /> The contractor shall provide and have "on hand" at all times during the brick dust maintenance <br /> operation the following equipment. <br /> 5.1 Utility Vehicle <br /> Small tight turn radios (13') vehicle designed especially for this type of work. This <br /> vehicle shall have the capability to make circle and figure eight patterns completely <br /> within the skinned brick dust infield area and not trespass onto adjacent turf areas. <br /> Vehicles manufactured by John Deere, Ryan, Toro and Daihatsu maybe acceptable. <br /> 5.2 Draus <br /> 5.2.1 Scarifying Drag: Used to scratch up or loosen up the skinned area. The <br /> drag shall be made of heavy-duty steel capable of caiYying additional <br /> weight {`s}. Digging teeth shall be hardened and pointed and be '/z" in <br /> diameter. Pull chain shall be included. <br /> 5.2.2 Cutting and Leveling Drag: Used to level and backfill low spats in the <br /> skinned area. The leveling drag and cutting blades shall be made of <br /> galvanized steel. This drag shall feature cutting blades that are <br /> adjustable and capable of cutting down dirt build-up (high spots) and <br /> depositing dirt into holes (low spots} creating a smooth and level playing <br /> surface. Pull chain shall be included. <br /> 5.2.3 Grooming or Finish Drag: Used to complete dragging procedure on a <br /> daily basis and lighter/gentle movement of brick dust. This drag shall be <br /> galvanized metal "door-mat" link. Pull chain shall be included. Drag <br /> shall be 6' in length by 6' in width. <br /> 5.3 Other Equipment <br /> 5.3.1 Hand Tamn: 201b. variety with 48" min. handle. Used to compact worn <br /> areas around bases, home plate and pitching mound. { <br /> 5.3.2 Plastic Sheeting and Duct Tape: Used to wrap hand tamp head and help <br /> prevent wet clay from sticking. <br /> 25C-112 <br /> <br />