Laserfiche WebLink
e. There should be a minimum space of seven feet between the top of <br /> the antenna and the top of the branches. <br /> f. Branches should have an upward sweep similar to that of actual <br /> Canary Island Pines. <br /> g. Branch foliage color should be an olive green with some brown <br /> "needles" to match an actual Canary Island Pine. A sample should be <br /> submitted for approval prior to fabrication. <br /> h. Full bark cladding with a custom color should be submitted for approval <br /> prior to fabrication. <br /> i. All antennas shall be covered with "pine antenna socks" that match the <br /> approved foliage color. <br /> j. All "stand-off mounts" and support pipe mounts shall be concealed <br /> behind antennas and painted a darker shade or green (or black) with a <br /> "flat" paint finish to reduce reflection and visibility of the mounting. <br /> k. Include the tree specifications (selected manufacturers and models) <br /> with photo simulations (also a site plan review requirement). <br /> I. Show the location of the GPS antenna on all elevations. <br /> m. Provide a "unistrut" detail for the utility cabinet; an "H-frame" is not <br /> acceptable. <br /> n. Provide a note on the plans stating "install underground utilities <br /> sleeving for two carriers during construction of the structure". Shrouds <br /> on the outside of the pole are not acceptable. <br /> o. All exterior conduit and electrical meters shall be installed and <br /> screened in one metal enclosure painted to match the structure. <br /> <br /> 5. The permit applicant recognizes that the frequencies used by the cellular <br /> facility located at 2100 South Fairview Street are extremely close to the <br /> frequencies used by the City of Santa Ana for Public Safety. This <br /> proximity will require extraordinary "comprehensive advanced planning <br /> and frequency coordination" engineering measures to prevent <br /> interference, especially in the choice of frequencies and radio ancillary <br /> hardware. This is encouraged in the "Best Practices Guide" published by <br /> the Association of Public-Safety Communications Officials-International, <br /> Incorporated (APCO), and as endorsed by the Federal Communications <br /> Commission (FCC). Prior to the issuance of any permits to install the <br /> facility, (permit applicant) shall meet in good faith to coordinate the use of <br /> Resolution No. 2010-03 <br /> Page 5 of 6 <br /> 31 A-15 <br /> <br />