OTIS ELEVATOR COMPANY 4 - Laserfiche WebLink

Home Browse Search

Specifications for the Police Administration Building & Holding Facility Car and Counterweight Buffers - Overspeed Governors, Governor Tension Sheave Assemblies, and Car and Counterweight Safeties - Limit, Landing and Slowing Switches - Door Protective Devices and Alarm Bells Conduct a yearly no-load, low speed test of car and counterweight safeties and a test of buffers. Periodically equalize the tension in all hoistway ropes. Replace all wire ropes and fastenings, when conditions warrant. Examine and when conditions warrant, regroove or replace all sheaves, governor tension sheaves, secondary or deflection sheaves, and compensationg sheaves. Periodically examine, lubricate, adjust, and when conditions warrant through normal wear and tear, repair or replace the following accessory equipment. Car and Corridor Operating Push -buttons Load Weighing Equipment All Hall Lantherns, Car Position, and Hall Position indicators, Lobby Control Panels, Car Operation Panels, and all other Signal and Accessory Facilities furnished and installed as part of the whole equipment. Periodically clean all elevator machine rooms, secondary areas, elevator hoistways, and pit areas. Montgomery KONE Inc. will be responsible for keeping the machine rooms, the exterior of the machinery, and any other parts of the equipment subject to rust, properly painted, identified, and presented to all times. During the course of each examination, all accumulated refuse in the pit areas will be discarded. Annual clean the elevator hoistway and related equipment including rails, inductors, hoistway door hangers and tracks relating devices, switches, buffers, car tops and pit areas. Exhibit A Page 3 Steel Parts cabinets will be maintained in the machine room areas to provide for the orderly storage of replacement components. Perform the following tests on the elevator equipment: 20 of 29