Item 07 - Sewer System Management Plan 2025 Update

Home Browse Search

CITY OF SANTA ANA APPENDIX I PROJECT NO.: XX-XXXX PROJECT TITLE The Contractor shall submit all material information for sewer lateral cleanout connections and appurtenances prior to commencing work. The Engineer shall review and upon approval notify the Contractor by a memorandum. Non -approved materials shall not be used. New submittals shall be required for material substitutions. The Engineer shall review and upon approval notify the Contractor by a memorandum. All fittings shall be pressure rated and classified the same as adjoining pipe. The inside diameter shall match inside diameter of adjoining pipe and shall be designed for pipe bursting or pipe jacking applications. Metal in saddles, clamps and appurtenances shall be 302 or 304 stainless steel following ASTM A240. Elastomeric materials, gaskets, clamps and connectors shall be oil resistant and manufactured following ASTM F477. The Contractor shall submit certification by the manufacturer of the pipe bursting system to have successfully completed training in operating the bursting head, installing proposed replacement pipe and operation and maintenance of all equipment to be used. The Contractor shall submit certification by the manufacturer of the fusing equipment having successfully completed training in handling replacement of pipe materials, butt - fusion of pipe joints and saddle fusion of fittings for service laterals, and operation and maintenance of all equipment to be used. The Certificate of Training includes at a minimum: Installer's name, date of issuance and process or product the person/s is/are certified to install. These certifications of training and operation of pipe bursting system shall be submitted prior to commencing pipe bursting work. The curb and gutter shall be protected in place. If the Contractor damages curb, gutter, it shall be removed and replaced to match existing in accordance with City of Santa Ana Standard Plan No. 1101. This work shall also include removal and replacement of PCC sidewalk, driveway panels and landscaping to facilitate construction of sewer laterals. PCC sidewalk and driveway approach panels shall be replaced to match existing in accordance with City of Santa Ana Standard Plan Nos. 1104 and 1112. Sidewalk replacement shall be from score line to score line, unless the sidewalk panels exceed four feet in length. At no time, shall a sidewalk panel floater be less than four feet from the nearest score line. Landscaping shall be replaced in -kind. 6.16 CONSTRUCT 4" OR 6" POLYVINYL CHLORIDE (PVC) SEWER LATERALS AND CLEANOUTS (OPEN TRENCH) PVC sewer pipe shall be as manufactured by JM EAGLE or approved equivalent. PVC gravity sewer pipe and fittings shall conform to ASTM D3034 for diameters from 4" - 15", and ASTM F679 for 18" - 24", with integral bell gasket joints. Rubber gaskets shall be factory installed and conform to ASTM F477.