Laserfiche WebLink
Santa Ana <br /> Community <br /> Artist(a) <br /> Coalition <br /> Santa Ana Community Artist(a) Coalition <br /> 1205 W. St. Gertrude Place <br /> Santa Ana, CA 92707 <br /> artistacoalition@gmail.com <br /> 714- 907 5468 <br /> 2/28/2025 <br /> To Whom It May Concern, <br /> Work Plan for Restoration <br /> 1. Current Condition Documentation <br /> • High-resolution photographs will be taken to document the mural's existing condition, <br /> including any fading, cracking, or delarnination of paint layers. <br /> • A detailed assessment of mural damage will be conducted, identifying areas requiring <br /> cleaning, in-painting, or structural reinforcement. <br /> • If any portions of the mural are at risk of detachment, conservation specialists will <br /> evaluate the best approach for stabilization. <br /> 2. Site Preparation <br /> • Protective jute netting and sandbags will be placed beneath the mural to capture debris. <br /> • Plastic coverings will protect surrounding surfaces, while canvas coverings will be used <br /> on the ground to prevent slipping hazards. <br /> • Rolling scaffolding will be set up for safe and efficient access to the mural. <br /> 3. General Cleaning (SACAC Team with Community Apprentices) <br /> • Mural Wash Solution (1:1 ratio of surfactant to water) will be applied with soft brushes to <br /> remove dirt and organic buildup. <br /> • A low-pressure water rinse will be used to carefully remove residues without damaging <br /> the original artwork. <br /> • The surface will be left to dry for 24 hours before moving to the next step. <br /> 4. Paint Delamination Treatment (SACAC with Conservation Experts & Apprentices) <br /> • The mural will be divided into 10 ft sections for controlled cleaning. <br /> • A gel solvent solution will be applied to loosen overpainting, ensuring that original layers <br /> are preserved. <br /> • After a monitored waiting period, the mural will be cleaned using hot wet steam pressure <br /> washing to carefully remove unwanted paint. <br /> • The surface will be thoroughly rinsed and left to dry for 48 hours. <br />