Laserfiche WebLink
TRANSIT ZONING CODE: Applicability of Code, cont'd <br /> Sec. 41-2004. The Industrial Overlay (I-OZ) Zone <br /> (a) The Industrial Overlay Zone (I-OZ) is applied to areas zoned M1 or M2 and <br /> occupied with an industrial use at the time of the adoption of this Article. The <br /> zoning for the individual parcels shall be determined by Sectional District Map <br /> number 7-5-9 as it appeared on May 1, 2010. <br /> (b) The I-OZ allows the M1 and M2 regulations to apply to said parcel until <br /> such time as the property owner applies to modify the zoning district. The <br /> Regulating Plan identifies the boundaries of the applicable zoning district <br /> (i.e. Transit Village, Urban Center, Corridor, Urban Neighborhood 1 or Urban <br /> Neighborhood 2) within the Transit Zoning Code. <br /> (c) A property owner may apply to develop the parcel consistent with the applicable <br /> zoning district within the Transit Zoning Code. The applicant shall receive all <br /> the necessary site approvals including, the approval of the overlay zone site <br /> plan pursuant to Article III, Division 28 prior to development. <br /> (d) The uses in the I-OZ shall be subject to the regulations ofthe M1 and M2 zones <br /> (SAMC 41, Article III, Divisions 18 and 19), as applicable. <br /> Sec. 41-2005. Application for Discretionary Approvals <br /> (a) Site Plan Review shall mean specific development plan and shall comply with <br /> Sections 41-593.4 through 593.6. Sections 41-593.4 through 593.6 shall only <br /> apply to structures over four (4) stories in height. <br /> (b)Conditional use permits, variances and minor exceptions. Conditional use <br /> permits, variances and minor exceptions shall be subject to Article V, except for <br /> the permit thresholds for minor exceptions shall be as identified in Table 1 B. <br /> <br /> 1:5 TRANSIT ZONING CODE <br /> SPECIFIC DEVELOPMENT 84 <br /> City of Santa Ana, California <br /> <br />