Laserfiche WebLink
When the "OZ" symbol is applied as a suffix in combination with the district symbol, the overlay <br /> zone regulations are intended to apply only to those proposed uses which are permitted or <br /> conditionally permitted in the overlay zone to which the suffix is combined. In any case where <br /> the development project does not choose to adhere to the overlay zone, the standards and <br /> regulations of the underlying zoning district shall apply. <br /> (Ord. No. NS-2739, § 3, 4-2-07) <br /> <br /> Sec. 41-595.5. Approval of overlay zone site plans. <br /> No permit for a building or structure shall be issued for any property subject to the provisions of <br /> this division until the following requirements have been met: <br /> (a) If the property is within a zoning district classification combined with an OZ suffix and <br /> the applicant wants to apply the overlay zone, the applicant must obtain for said <br /> property an overlay zone site plan review permitting use of the property in accordance <br /> with an overlay zone plan. <br /> 1 Said site Ian review ermit shall be a roved, conditionall a roved, or denied b <br /> p p pp y pp ~ ~ <br /> the Planning Commission in accordance with the provisions of article V of this chapter_ <br /> applicable to a conditional use permit. <br /> ~2, After the City Council has completed the review of the written finding of fact of the <br /> planning commission pursuant to section 41-642, the property shall be subject to the <br /> standards and regulations of the overlay zone and an overlay zone site plan review <br /> conditions of approval. <br /> 3 All development shall be incompliance with all conditions of approval prior to <br /> issuance of a utility release by the executive director of the planning and building <br /> agency. <br /> ~4~pon the issuance of the utility release or the Certificate of Occupancy, whichever <br /> comes first, the Executive Director of Planning and Building shall amend the sectional <br /> district map to reflect the overlay zone as the sole zone on the property= , . ~ - <br /> (b) If the property is within an OZ district, the overlay zone plan must be adopted by <br /> ordinance of the city. Such ordinance, in addition to adopting the overlay zone site plan, <br /> shall specify the uses permitted on such property, together with any restrictions or <br /> conditions pertaining to such uses. <br /> (c) If an overlay zone site plan of the type specified in subparagraph (2) of section 41- <br /> 595.3(a) as consisting of standards and regulations is approved, the applicant must <br /> thereafter prepare plans and drawings as specified in paragraph (1) of said section in <br /> conformity with such overlay zone plan and obtain approval thereof by resolution of the <br /> planning commission after review and recommendations by the planning manager. No <br /> building permit or utility release shall be issued except for development in accordance <br /> with such approved plans and drawings. <br /> <br /> Sec. 41-610.5. Wall and fence requirements in the industrial and commercial zones. <br /> (a) In the industrial and commercial zones, walls and fences shall not exceed ten (10) feet <br /> in height, and shall not exceed four (4} feet in height where the wall or fence extends into the required <br /> Page 8 of 11 <br /> <br />