Laserfiche WebLink
Specifications for Emergency Generators Preventive Maintenance <br />1. Inspect/replace worn accessory drive and alternator belts. <br />2. Replace cracked, leaking, or soft hoses, tighten loose clamps. <br />FAN DRIVE <br />1. Lubricate bearings. <br />2. Lubricate belt tightener, grease fittings. <br />AIR SYSTEM <br />1. Replace element. <br />2. Check hoses and ducting for leaks. <br />BATTERIES <br />1. Tighten battery retainers. <br />2. Check electrolyte levels, add distilled water as needed. <br />3. Clean battery's exterior and terminals. <br />4. Check battery charger for proper charge rate. <br />CENTRIFUGAL FIRE PUMP <br />1. Test pump under pressure with motor running. <br />2. Check all safety interlocks. <br />3. Check bearings. <br />4. Check seals. <br />TRANSFER SYSTEM FOR ALL GENERATORS <br />1. Test with approval of Building Maintenance Superintendent that electrical transfer switches <br />are working properly. (PMA's required) <br />2. Transfer load from Edison to emergency generator. <br />I I orz6 <br />25A-9