Laserfiche WebLink
d. Branches should start at 15 feet above the ground. <br />• e. There should be a minimum space of seven feet between the top of <br />the antenna and the top of the branches. <br />f. Branches should have an upward sweep similar to that of actual <br />Canary Island Pines. <br />g. Branch foliage color should be an olive green with some brown <br />"needles" to match an actual Canary Island Pine. A sample should <br />be submitted for approval prior to fabrication. <br />h. Full bark cladding with a custom color should be submitted for <br />approval prior to fabrication. <br />All antennas shall be covered with "pine antenna socks" that match <br />the approved foliage color. <br />j. All "stand-off mounts" and support pipe mounts shall be concealed <br />behind antennas and painted a darker shade or green (or black) <br />with a "flat" paint finish to reduce reflection and visibility of the <br />mounting. <br />k. Include the tree specifications (selected manufacturers and models) <br />with photo simulations (also a site plan review requirement). <br />Show the location of the GPS antenna on all elevations. <br />m. Provide a "unistrut" detail for the utility cabinet; an "H-frame" is not <br />acceptable. <br />n. Provide a note on the plans stating "install underground utilities <br />sleeving for two carriers during construction of the structure". <br />Shrouds on the outside of the pole are not acceptable. <br />o. All exterior conduit and electrical meters shall be installed and <br />screened in one metal enclosure painted to match the structure. <br />6. The permit applicant recognizes that the frequencies used by the cellular <br />facility located at 26493/ West First Street are extremely close to the <br />frequencies used by the City of Santa Ana for Public Safety. This <br />proximity will require extraordinary "comprehensive advanced planning <br />and frequency coordination" engineering measures to prevent <br />interference, especially in the choice of frequencies and radio ancillary <br />hardware. This is encouraged in the "Best Practices Guide" published by <br />• the Association of Public-Safety Communications Officials-International, <br />Resolution No. 2006-031 <br />Page 5 of 8 <br />