11A - ORDINANCE - BUILDING CODE - Laserfiche WebLink

Home Browse Search

fully as if set forth at length herein as provided for in section 419 of the Charter of the city, except for the changes to the property maintenance code set forth in this chapter of this Code that specifically amends the property maintenance code. Any previously enacted, unrepealed provision of this Code that amended a pre-2009 edition of the "Property Maintenance Code" shall also be construed as amending the applicable provision of the 2009 or later edition of the property maintenance code. The property maintenance code, as thus amended, together with all other provisions of this article, shall be known as the city property maintenance code. (a) Section 302.8 of the Property Maintenance Code is amended to read as follows: 302.8 Motor vehicles. Except as provided for in other regulations, no inoperative or unlicensed motor vehicle shall be parked, kept or stored on any premises, unless within an enclosed structure, and no vehicle shall at any time be in a state of major disassembly, disrepair, or in the process of being stripped or dismantled. Painting of vehicles is prohibited unless conducted inside an approved spray booth. Occupancy of any motor vehicle for the purpose of living, sleeping, eating or cooking shall only III occur within an approved trailer park. Exception: A vehicle of an any type is permitted to undergo major overhaul, including body work, provided that such work is performed inside a structure or similarly enclosed area designed and approved for such purposes. When auto repairs or maintenance occur on a property used for residential occupancy, only vehicles registered to the premises may undergo such repairs or maintenance. (b) Section 304.3 of the Property Maintenance Code is amended to read as follows: [F] 304.3 Premises identification. Buildings shall have approved address numbers placed in a position to be plainly legible and visible from the street or road fronting the property. These numbers shall contrast with their background. Numbers shall be a minimum of 4 inches (102 mm). (c) Section 304.14 of the Property Maintenance Code is amended to read as follows: 304.14 Insect screens. Every door, window and other outside opening required for ventilation of habitable rooms, food preparation areas, food service areas or any areas where products to be included or utilized in food for human consumption are processed, manufactured, packaged or stored shall be supplied with approved tightly fitting screens of not less than 16 mesh per inch (16 mesh per 25 mm), and every screen door used Ordinance No. NS-XXXX 11A-19 Page 19 of 43