25C - AGMT - RIGHT-OF-WAY DEMO SURVEY AND ENVIR ASMT SRVS

Home Browse Search

• The Consultant shall diligently work on each assignment and complete each task in accordance with the schedule and accommodate the City's needs. • The Consultant's work will be subject to inspections by City, County, State and Federal representatives. • Project files including copies of all correspondences, reports, documents, and electronic files shall be submitted to the City when requested. • All work, including reports, analysis, data, and intellectual properties developed during the life of the Agreement shall become the properties of the City. • The Consultant will receive written notification of the award of the contract. Upon on such notification, the Consultant will proceed with the services required by the Agreement. Specific Scope of Work for Surveying and Mapping Services includes: The work, in general, consists of performing digital mapping by photogrammetric methods as well as surveying for arterial streets. In addition, City may need consultant services for legal description preparation. Provide survey services as requested. A detailed scope of work will be outlined when specific project is assigned to the consultant. Services shall include, but are not limited to, cross-sections, intersection grids, centerline determination, digital terrain models (.dtm), right of way determination, and the preparation of legal descriptions with exhibits. Generate a computer drawing in Microstation V8 format showing survey per the attached City of Santa Ana CADD Standards as well as the sample survey drawing on the City of Santa Ana website listed below: • All survey needs to be prepared to the satisfaction of the City's Senior Surveyor and meet the following standards: o Horizontal control shall be based on the 1983 North American Datum (NAD83), tied to a minimum of two proximate County of Orange, CCS83, Zone VI, 1991.35 Epoch Adjustment control points. Project coordinate values shall be provided in U.S. Survey Feet. The County control points shall determine the Basis of Bearing for the project. o Vertical control shall be based on the North American Vertical Datum of 1988 (NAVD88), tied to a minimum of two proximate County of Orange bench marks. Project elevations shall be provided in U.S. Survey Feet. o Horizontal alignment(s) for the project shall be tied to the survey centerline monuments within the project area. o With the coordinate values, a full location and detailed description, including point character with reference(s), shall be provided for all found and set monuments for the project. For this purpose, a sketch of the control network is required. 25C-39