MARINA LANDSCAPE, INC. - 2011 - Laserfiche WebLink

Home Browse Search

5.4.4 Infield Sopoer with Wringer and Bucket: Used to collect standing water in brickdust areas. Sopper shall be geotextile-covered sponge typical for absorbing chemical spills. 6.0 Meetings 6.1 Contractor shall provide City of Santa Ana staff with a contact person and a phone number to reach the contact person from the hours of 6:30am — 5:00pm, Monday — Saturday. 6.2 Contractor shall appoint and identify to City of Santa Ana staff a "site supervisor". This site supervisor shall meet with staff as requested at time and place agreed upon by both parties for as long as the contract is in effect to discuss any problems/concerns that may arise and any goals for the week. 6.3 In November of each year for as long as the contract is in effect, Contractor shall personally meet with staff, along with the designated site supervisor, to discuss and outline schedules for "Annual Renovations" (listed in Section 10.0). 7.0 Daily Infield Maintenance 7.1 General 7. 1.1 Contractor shall remove all litter, broken glass and hazardous debris from infield and dugout areas. 7.1.2 Contractor shall keep brickdust and dugout areas in a weed free condition. 7.1.3 Contractor shall hose and/or sweep and hose out all dugouts so they are 100% free of brickdust or any other debris. 7.2 Maintenance Procedure 7.2.1 Retain smooth and level playing surface, using the following daily procedure. The contractor shall remove all bases before beginning any work on in -field and re -install after all work on in -field is completed. 7.2.2 After removing all bases, the contractor shall scrape/wire brush all base post anchors and base inserts. This will help facilitate the base removal and installation. 7.2.3 The Contractor shall rake/shovel loose material from high spots back into low spots/worn areas on running paths, sliding zones, and any other low spots/worn areas appearing on the field before any watering or dragging shall take place 7.3 Home Plate Area/Batters Box Area Holes 7.3.1 Sweep/Rake away all loose brickdust. 7.3.2 Wet area until moist. 7.3.3 Scarify area (`s) [batters box hole(`s)] with shovel. This will help the mix bind better. 7.3.4 In a 5 gallon bucket mix "mound mix" with water to desired consistency. Do not use infield mix for this purpose. 7.3.5 Backfill "mound -mix" material into hole(`s).