Laserfiche WebLink
CONDITIONS OF APPROVAL FOR TENTATIVE TRACT MAP NO. 2013-03 <br />(COUNTY MAP NO. 17499) <br />Tentative Tract Map No. 2013-03 (County Map No. 17499) is approved subject to <br />compliance, to the reasonable satisfaction of the Planning Manager, with all applicable <br />sections of the Santa Ana Municipal Code, the California Administrative Code, the Title 24, <br />California Building Code and all other applicable regulations. <br />The applicant must comply in full with each and every condition listed below prior to <br />exercising the rights conferred by this tentative tract map. <br />The applicant must remain in compliance with all conditions listed below throughout the life <br />of the tract map. Failure to comply with each and every condition may result in the <br />revocation of the vesting tentative tract map. <br />A. Planning Division <br />1. All proposed site improvements must conform to the Site Plan Review <br />approval of DP No. 2010-19. <br />2. The Tentative Tract Map, Final Map, and all improvements required of the <br />subdivider shall be in accordance with the design standards and <br />specifications of the Santa Ana Municipal Code and the requirements of the <br />State Subdivision Map Act. <br />3. The covenants, conditions, and restrictions (CC&Rs) shall be reviewed and <br />approved by the Planning Division (Added by the Planning Commission, <br />May 28, 2013) prior to approval of the final tract map, and shall be recorded <br />prior to the issuance of building permits. <br />4. The final tract map shall be recorded within one year of the date of approval <br />of the tentative map by the City Council. <br />5. The final tract map shall be approved and recorded prior to issuance of <br />building permits. <br />6. Two copies of the recorded final map and CC&Rs shall be submitted each to <br />the Planning Division, Fire Department, Building Division, and Public Works <br />Agency within 10 days of recordation. All easements shall be recorded prior <br />to or concurrent with the final map. <br />7. Due to the technical expertise required to successfully execute a true <br />Humpy Bumpy finish, the following condition shall apply: Prior to application <br />of the building stucco finish, applicant shall prepare a sample wall section <br />showing proposed Humpy Bumpy browncoat 16/20 finish with 3/8" variation <br />32C-24