Laserfiche WebLink
Document management portal powered by Laserfiche WebLink 9 © 1998-2015 Laserfiche. All rights reserved.
1.6.4.1.1. Install sufficient quantities to cover entire side of installed data <br />equipment rack. <br />1.6.4.2. Horizontal panels: CPI Universal Horizontal Cable Manager — <br />Black in color. <br />1.6.4.2.1. Double Rack Space: CPI Part # 30130 -719 <br />1.6.4.2.2. Triple Rack Space: CPI Part # 30131 -719 <br />1.6.4.2.3. Seven (7) foot open frame relay rack: <br />1.6.4.2.3.1.lnstall double -space panels at the top of each installed <br />seven (7) foot data equipment rack and triple -space panels in <br />other locations. <br />1.6.4.2.4. Twenty -four (24), thirty -six (36), or fourty -eight (48) inch open <br />frame rack: <br />1.6.4.2.4.1.install double -space panels only. <br />1.7. EQUIPMENT RACKS <br />1.7.1. Provide required 7 ft. high, 19" finished aluminum, equipment rack(s) and <br />rack hardware assemblies. Comply with the following: <br />1.7.1.1.For each rack, provide (2) panel mounted, UL listed, 15 AMP, 110/120 <br />VAC power strips, with circuit breaker, a minimum of six outlets and <br />an 8 ft. power cord with NEMA 5 -15P plug. <br />1.7.1.2. For each rack, provide rack mounted ground bar. <br />1.7.1.3. Provide required horizontal and vertical cable management panels. <br />1.7.1.4.Provide all required earthquake bracing hardware. <br />1.8. CABLE PATHWAY AND SUPPORT HARDWARE <br />1.8.1. Provide all riser -rated innerduct for fiber backbone cable installation. <br />1.8.2. Provide all required trade size 12" and 18" cable rack (ladder rack) to <br />allow for proper routing of horizontal, or backbone cabling. Build out of <br />ladder racks subject to individual project requirements and scope of work. <br />Comply with the following: <br />1.8.2.1.Finish: Telco Gray <br />Page 7 of 24 <br />