23A - PROJ - WATER MAIN IMPROVEMENTS

Home Browse Search

CITY OF SANTA ANA SPECIFICATIONS PROJECT NO. 11 -6416 SEVENTEENTH STREET WATER MAIN IMPROVEMENTS The second paragraph of CSS Section 84 -3.05 shall be amended to read as follows: Street sweeping of the areas to be re- striped will not be required, but obvious accumulations of loose material or debris shall be removed prior to application of paint or thermoplastic. Thin -mil thermoplastic material shall be applied to the pavement at a temperature between 3509 F. and 4009 F., unless the manufacturer recommends a different temperature. Section 84 -2.05, Measurement, and Section 84 -2.06, Payment, shall be deleted. Section 84 -3.06, Measurement, and Section 84 -3.07, Payment, shall be deleted. f. Raised Pavement Markers (RPM'S) Raised pavement markers shall conform to Section 85, "Pavement Markers," of the CSS and these TECHNICAL PROVISIONS . Reflective pavement markers shall have abrasion - resistant surfaces. 1. REMOVAL - The contractor shall remove any existing raised pavement markers that do not conform to the channelization plans, and repair any damaged pavement due to RPM removal to maintain a smooth and uniform surface per SSPWC Section 302 - 5.6.2. Any missing or broken raised pavement markers shall be replaced, in kind, within the project boundaries. 2. INSTALLATION — Install raised pavement markers per the channelization plans in accordance with Section 85 -1.06, Placement, of the CSS, and CSASP Nos. 1125A -C. Section 85 -1.08, Measurement, and Section 85 -1.09, Payment, shall be deleted. 2.03 SIGNS (Roadside Signs) AND MARKERS This section shall conform to Section 56 -2, Roadside Signs of the CSS and these Technical Provisions. 1. General All new signs shall be furnished and installed by the Contractor. The sign sizes, messages, and colors shall conform to the current edition of the Caltrans Sign Specifications. The sign sizes shall be the standard size shown in the Sign Specifications unless shown otherwise on T -2d 23A -91