Laserfiche WebLink
CITY OF SANTA ANA <br />SPECIFICATIONS <br />PROJECT NO. 11 -6416 <br />SEVENTEENTH STREET WATER MAIN IMPROVEMENTS <br />The Contractor shall install new and relocate existing signs as noted on the plans, shall protect - <br />in -place existing signs, posts and parking meters which are not to be removed, and shall <br />replace any of these signs which are damaged during construction. <br />Sign to be mounted on streetlight or traffic signal poles shall be installed using the strap and <br />saddle bracket method as shown on Caltrans Standard Plan RS -4. Sign panels on traffic <br />signal mast arms shall be installed per Caltrans Standard Plan ES -7N, Detail U. Signs <br />mounted on streetlight poles (electroliers) shall be mounted so as not to cover electrolier <br />identification tags. <br />Posts shall be installed in driven post anchors per the manufacturer's specifications. <br />New signs shall be installed on 10 foot posts, except a longer post shall be used if necessary <br />to maintain a 7 foot vertical clearance from the bottom of the lowest sign to the top of the <br />surrounding surface in pedestrian areas. Sign posts shall be installed a minimum of 6 feet <br />from power poles, fire hydrants, and other obstructions. Sign posts shall be installed per <br />City of Santa Ana Standard Plan No 1504. <br />All signs to be salvaged, as called for on the plans, shall be become property of the contractor. <br />All posts driven sign post anchors shall be completely removed and the sign post anchor <br />assembly hole backfilled with clean fill dirt to match the existing surrounding grade (non -paved <br />areas only). Driven sign post anchors in sidewalk or pavement areas shall be completely <br />removed and backfilled with grout to the level of the surrounding grade. <br />Sign posts with foundations in parkway area shall be completely removed and backfilled with <br />clean fill dirt to match the grade of the surrounding area. Sign posts located within sidewalk or <br />other paved areas, shall core drill the sidewalk and remove the sign post to below sidewalk or <br />paving then backfilled with concrete or paving material to match the existing. <br />Section 56 -2.04, Sign Panel Installation, shall be deleted. <br />Section 56 -2.05, Measurement, shall be deleted. <br />Section 56 -2.06, Payment, shall be replaced with the following: <br />2.04 PAYMENT <br />Unless noted otherwise, all work relating to signing and striping, including but not limited <br />to removal and installation of signs, posts, markers, RPM'S, stripes, pavement markings, <br />and curb markings, shall be considered included in the lump sum price paid for Signing and <br />T -2g <br />23A -94 <br />