PALP INC. DBA EXCEL PAVING COMPANY (4)

Home Browse Search

DESIGNATIONICERTIFICATION OF ASPHALT-RUBBERAND AGGREGATE MEMBRANE CONTRACTOR AND/OR SUBCONTRACTOR(S) Bidder proposes to have the ARAM installed by: Manhole Adjusting, Inc. This section shall be completed even if the apparent low bidder plans to produce and install ARAM with its own forces. Name of Contractor and/or Subcontractor(s) shall be the actual company(ies) applying the binder and aggregate. For any bid to be considered responsive, performance criteria must be demonstrated on five separate projects performed by the same contractor or subcontractor(s) designated above, and with equivalent aggregate and binder proposed for the ARAM in this bid. Two years shall have elapsed since completion of the ARAM surface on each project and the projects shall be located in Southern California. To be considered a valid representative project, bidder must submit the name of the project, owner agency, agency representative's name and phone number, and a list of streets with limits totaling at least 1 mile (based on full width) in length for each project and the date the project was actually performed. A project will be considered a valid representative project if an asphalt emulsion spray application was originally placed with or without an application of sand, within 15 calendar days of the application of ARAM. Any other cover coat or course on the ARAM will cause the ARAM to be considered invalid as a representative project. ARAM on all projects must show insignificant raveling (loss of rock) and insignificant flushing (binder migration to the surface) at time of inspection by the Agency. Bidder shall verify any proposed representative projects prior to listing a subcontractor with such projects, or the bid will be considered non-responsive. If the Bidder cannot list in the space provided five projects that meet the criteria specified herein that were performed by the proposed ARAM contractor or subcontractor(s), the bid shall be considered non-responsive.