RESO 2015-29_1200NTustin - Laserfiche WebLink

Home Browse Search

e. There should be a minimum space of seven feet between the top of the antenna and the top of the branches. f. Branches should have an upward sweep similar to that of an actual deciduous or broadleaf tree. g. Branch foliage color should be an olive green with some brown leaves to match an actual deciduous or broadleaf tree. A sample shall be submitted for approval prior to fabrication. h. Full bark cladding with a custom color should be submitted for approval prior to fabrication. All antennas shall be covered with "antenna socks" that match the approved foliage color. All "stand -off mounts" and support pipe mounts shall be concealed behind antennas and painted a darker shade or green (or black) with a "flat" paint finish to reduce reflection and visibility of the mounting. k. Include the tree specifications (selected manufacturers and models) with photo simulations (also a site plan review requirement). I. Show the location of the GPS antenna on all elevations. M. Provide a "unistrut" detail for the utility cabinet; an "H- frame" is not acceptable. n. Provide a note on the plans stating "install underground utilities sleeving for two carriers during construction of the structure ". Shrouds on the outside of the pole are not acceptable. o. All exterior conduit and electrical meters shall be installed and screened in one metal enclosure painted to match the structure. 5. The permit applicant shall provide a 24 -hour phone number to which interference problems may be reported. This condition will also apply to all existing facilities in the City of Santa Ana. 6. The permit applicant will provide a "single point of contact" in its Engineering and Maintenance Departments to insure continuity on all interference issues. The name, telephone number, fax number and e-mail address of that person shall be provided to the City's designated representative upon activation of the facility. Resolution No. 2015 -29 Page 6 of 7