25G - AGMT - SANITARY SEWER SYS - Laserfiche WebLink

Home Browse Search

SECTION 4. INSTALLATION AND ACTIVATION INSTALLATION • Standard Installation: The SmartCover® -S unit is installed in the field at the designated location. Alternate Installation: The SmartCover® -S unit is installed on the selected cover off site and transported to the designated location. This method can minimize the need for traffic control and disruption. • Installation consists of physically attaching of the SmartCoverkS unit to the cover at the designated location; alignment and on -site testing to ensure that the unit is operational prior to leaving the site. • The SmartCover® -S unit is mounted directly to the lid or hatch by the use of stainless steel hardware. • The SmartCover® -S antenna is low profile, high performance and traffic rated. Attachment of the antenna is achieved by using Mil. -spec epoxy and requires the drilling of a 3/8" hole in the cover. • City of Santa Ana will provide personnel and equipment, as appropriate for traffic control as required by local regulations and safety of field personnel. ACTIVATION After the physical installation of the SmartCover® -S unit(s), the following actions are taken to bring full functionality to the SmartCover system. • SmartCover® -S Activation: City of Santa Ana Actions o Upon receipt of a Purchase Order, Hadronex will provide the City of Santa Ana with a questionnaire to obtain the information needed to perform the SmartCover -S service Set -Up. Proper system operation is dependent upon receipt of required information. This communication will be tested during activation phase. • SmartCovero -S Activation: Hadronex Actions Creation of the City of Santa Ana private database and account on the Hadronex secure server Web site configuration for City of Santa Ana SmartCovere -S units and users Initial population of the City of Santa Ana SmartCover ® -S database 17 Hadronex Inc. 2067 Wineridge Pl, Suite E, Escondido, CA, 92026 25G -29