Laserfiche WebLink
11.4 Infield turf shall be kept free of disease and rodents at all times. <br />11.4.1 The Contractor shall be responsible for identifying and treating any diseases or <br />rodents immediately upon notice, <br />11.5 Infield turf annual renovation (Optional, at City's request, as a contingency item) <br />11.5.1 Each year the infield turf shall be renovated: 1) verticut using the straight blade <br />reels with blades 1.25'-1.50" apart; 2) mowed to '/4" high immediately following <br />verticutting; 3) overseeded with Stovers Seed Company Bermuda Dunes at a rate <br />of 8 pounds of seed per 1,000 square feet; and, 4) top dressed immediately <br />following seeding by Materials using "Santa Ana Top Dress Mix"'/4" minus STA <br />tested /approved compost -seed topper with California Organic Phyta-Boost 7-1-2 <br />fertilizer pre -mixed (35 cubic yards seed topper to 700 pounds of organic <br />fertilizer). <br />11.6 Infield monthly overseeding (Optional, at City's request, as a contingency item) <br />11.6.1 Each month the infield turf shall be verticut using the greens reel mower straight <br />blade reels with blades 1.25'-1,50" apart and overseeded with Stovers Seed <br />Company Bermuda Dunes at a rate of I pound of seed per 1,000 square feet or <br />Simplot's Jaeklin Seed Company CSI Perennial Rye at a rate of I pound of seed <br />per 1,000 square feet. <br />12.0 General Contract Provisions <br />12.1 Contractor shall provide and is responsible for all equipment necessary to carry out the <br />work outlined in the contract. There will be no available storage for equipment. <br />Contractor will be responsible for bringing in and then removing all equipment necessary <br />to carry out the work outlined in the contract. <br />Consultant Responsibilities: <br />1.0 UNIFORMS AND VEHICLES IDENTIFICATION <br />1.1 The Contractor shall provide to all field personnel a standard uniform including but not <br />limited to uniform company hats, collared work shuts, pants, jackets, cold weather vests <br />and ANSI approved safety shoes. All uniforms will be marked by patch, sills screen or <br />embroidery with the company name and logo or other form of identification. <br />1.2 All equipment shall be clearly identified on both sides and rear of the vehicles as <br />belonging to the Contractor, well maintained, in excellent working condition, be clean in <br />appearance and without extensive visible damage, dirt graffiti etc. In addition, all <br />vehicles shall have the company's name, contractor's license number and contact <br />information clearly identified on both sides and the rear of the vehicle. <br />1.3 The Director's Representative reserves the right to direct the Contractor to remove an <br />employee or piece of equipment for not meeting high maintenance and appearance <br />standards. <br />2.0 SAFETY REQUIREMENTS <br />City of Santa Ana RFP 15-113 <br />Page 18 <br />