Laserfiche WebLink
Stabilizer Solutions Stabilizer Gold Infield Mix (with stabilizer). <br />3.2 Pitcher's Mound/Home Plate/Basepath Areas <br />3.2.1 When adding a mix with a higher clay composition material to any pitcher's <br />mound/home plate/base-path area, the specific type of material to be used is: Hill <br />Topper Horne Plate and Mound Mix. <br />33 Warning Track <br />3.3.1 When adding field composition mix to ball diamond warning tracks the specified <br />type of material to be used is: Stabilizer Solutions Stabilizer Warning Track Mix. <br />4.0 Equipment <br />The contractor shall provide and have "on hand" at all times during the brickdust maintenance operation <br />the following equipment. <br />4.1 Utility Vehicle <br />Small tight turn radios (13') vehicle designed especially for this type of work. This vehicle shall <br />have the capability to make circle and figure eight patterns completely within the skinned <br />brickdust infield area and .not trespass onto adjacent turf areas. Vehicles manufactured by John <br />Deere, Ryan, Toro and Daihatsu may be acceptable. <br />4.2 Drags <br />4.2.1 Scarifying Drag: Used to scratch up or loosen up the skinned area. The drag <br />shall be made of heavy-duty steel capable of carrying additional weight (`s). <br />Digging teeth shall be hardened and pointed and be %z" in diameter. Pull chain <br />shall be included. <br />4.2,2 Cutting and Leveling Drag: Used to level and backfill low spots in the skinned <br />area. The leveling drag and cutting blades shall be made of galvanized steel. <br />This drag shall feature cutting blades that are adjustable and capable of cutting <br />down dirt build-up (high spots) and depositing dirt into holes (low spots) creating <br />a smooth and level playing surface. Pull chain shall be included. <br />4,2.3 Grooming or Finish Drag: Used to complete dragging procedure on a daily basis <br />and lighter/gentle movement of brickdust. This drag shall be galvanized metal <br />"door -mat" link. Pull chain shall be included. Drag shall be 6' in length by 6' in <br />width. <br />Nail Drag: Used to lightly roughen infield surface. Use True Pitch Mound Nail Drag or <br />approved equal <br />4.3 Other Equipment <br />4.3.1 Hand Tamp: 20 lb, variety with 48" min. handle, Used to compact worn areas <br />around bases, home plate and pitching moumd.. <br />4.3.2 Plastic Sheeting and Duct Tape: Used to wrap hand tamp head and help prevent <br />wet clay from sticking. <br />4.3.3 Grade or Grooming Rake: Used torake and fine level areas. Shall be made of <br />aluminum, 36" wide and a 6' handle. <br />4.3.4 Heavy Duty Shovels: Used to move material. Round/Square Point and Scoop <br />shovels. <br />City of Santa Ana RFP 15-113 <br />Pape 12 <br />