25C - AGMT - WATER PUMP REHAB SRVS

Home Browse Search

CITY OF SANTA ANA RFP i` O,;. 16-090 NATER WELL, PUMP AND MOTOR REPAIR SERVICES Appendix ATTACHMENT" f SCOPE OF WORK A. General Description The Contractor shall provide water well casing, pump and motor rehabilltatlon, repair, replacementand related services for the City of Santa Ana at various locations within the City. The general scope of services Is described below:. B. Work Description The Contractor shall provide all necessary supervision, labor, materials, tools, and equipment to perform pump pulling and installations, water well rehabilitations,, well casing repairs and installations, water wait video Inspections,, electric motor repairs, electric motor rewlndfngs„ and repairseryloes on various types of pumps and. motors, on an as assigned basis, at various locations throughout the City. The Contractor shall meet with the Water Production project manager prior to: starting any :work. at the worksite. Access to the worksite shall be controlled by the Public Works Agency according to the sacurity standards in place at that time. The Contractor's services shall include, but are not necessarily limited to„the foflowfng: The Contractor shall provide transportation for its heavy duty equipment, such as, but not limited to, drilling rig pump rig, flatbed truck, boom truck, tractor trailer, as requested by the City to and from Contractor's facility to each Water Production worksite. All electric motor repair work shall be transported by the Contractor to an EASA.. Accredited Member facility for repair and returned to the City when repairs are complete. All water discharged shall be through an NPDES facility approved by the Project Manager It shall be the Contractor's responsibility to propose a' method to .discharge water that is NPDES compliant and may include methods such as water detenti;cn through storage tanks or other conforming strategies. 1, PUMP RCMaVALIINSTALLATION SERVICE The Contractor shall be qualified to perform water well pumps removal and instaliation. At the initial setup for pulling a Wal pump, the Contractor shall perform lockoutitagout of the electrical and hydraulic systems: 2. WELL PERFORMANCE TESTING SERVICE The Contractor shall be qualified to perform well performance testing. After initial well performance testing setup, all testing data shall be given to the City representative upon completion of testing, The Contractor shall furnish and install in e development engine temporarily used to power the test pump process to flush, out all sand and small grit out of the area around the wall to prevent clogging of the distribution system. All water discharged shall be through an approved facility approved by the Project Manager. The Contractor shall provide the Project Manager with Its evaluation and recommendation, Including cost estimates per project. All testing work shall be subject to the Project Manager's written approval prior to commencing any work by the Contractor. Well performance testing' shall be done In accordance with AWWA Al 00-97 standards. 3 WATERWORKS PUMP REPAIR SERVICE The Contractor shall be qualified to repair of one or more of the following pump units; 25C-11