WEBER WATER RESOURCES, LLC-2016 - Laserfiche WebLink

Home Browse Search

CITY or'S xA ANA RFP NO.: 1&090 WATER WELL, PUMP AND MOTOR. REPAIR SERVICES Apoendix ATTACHMENT 1: SCOPE OF WORK A. General Description The Contractor shall provide water well easing, pump and motor rehabilitation; repair, replacement and related services for the City of Santa Ana at various locations within the City. The general scope of services is described, below.. 8.. Work Description The Contractor shall provide all necessary supervision„ labor, materials, tools, and equipment to perform pump pulling and Installations, water well rehabilitations,, well casing repairs and installations, water well video inspections,, electric motor repairs, electric motor raw. indings, and repairseruces on various types of pumps and, motors, on an as assigned 'basis at various locations throughout the City., The Contractor shall meet with the Water Production project manager prior to starting any work at the works€to. Access to the worksite shall be controlled by the Public Works Agency according to the security standards in place at that time, The Contractor's services shall include, but are not necessarily limited to, the following: The Contractor shall provide transportation for its heavy duty equipment, such as, but not limited to, drilling rig, pump rig, flatbed truck, boom truck, tractor trailer, as requested by the City to and from. Contractor's facility to each Water Production worksite. All electric motor repair work shall be transported by the Contractor to an EASA Accredited Member facility for repair and returned to the City, when repairs are complete All. water discharged shall be through an NPDES 'Facility approved by the Project Manager. It shall be. the Contractor's responsibility to propose a m. ethod to discharge water that is NFIDES compliant andtnay include methods such as water detention through storage tanks: or other conforming strategies. 1. PUMP REMOVAL( NSTALLATiON SERVICE The Contractor shall be qualified to perform water well pumps removal enol Installation. At the initial, setup for pullfnrd a well pump, the Contractor shall perform loekoutitagout of the electrical and hydraulic systems. 2. WELL PERFORMANCE TESTING SERVICE The Contractor shall be qualified to perform well performance testing. After initial well performance testing setup, all testing data shall be given to the. City representative upon completion of testing. The Contractor shall furnish and install t h e development engine temporarily used to power the test pump process to flush out all sand and small grit out of the area around the well to prevent clogging of the. distribution system: All water discharged shall be through an approved facility approved by the Project Manager. The Contractor shall provide the Project Manager with its evaluation and recommendation, including cost estimates per project. All testing work shall be subject to the Project Manager's written approval prior to commencing any work by the Contractor. Well performance testing shall be done in accordance with AWWA Al 00-97 standards. 3. WATERWORKS PUMP REPAIR SERVICE The Contractor shall be qualified to repair of one or more of the following pump units: