Laserfiche WebLink
SPECIFICATIONS <br /> Solid Waste collection and Recycling plastic carts ("carts") for <br /> curbside service, City of Santa Ana, California <br /> Description <br /> Size A: 35 gallon <br /> Depth: 23 . 75 inches maximum (including handles) <br /> Width: 19 inches maximum <br /> Height: 35 inches maximum (to body rim) <br /> Size B: 64 gallon <br /> Depth: 27 inches maximum (including handles) <br /> Width: 24 inches maximum <br /> Height: 39 inches maximum (to body rim) <br /> Size C: 96 gallon <br /> Depth: 34. 5 inches maximum (including handles) <br /> Width: 26 inches maximum <br /> Height: 43 inches maximum (to body rim) <br /> All three sizes must be available in green, grey and burgundy. <br /> Technical Requirements <br /> 1. Body: Carts shall be injection molded of virgin high density <br /> polyethylene plastic. The body of the cart shall be molded to <br /> present a smooth interior and exterior surface. The body of <br /> the carts shall have a minimum wear strip under the floor of <br /> 1 inch (protecting the floor from abrasive contact with the <br /> street surface) . <br /> • 2 . Material: Recyclable polyethylene, U.L. approved with a <br /> rating of HB or, better. <br /> Average Wall Thickness: Size A: Not less than . 140 inch <br /> Size B: Not less than . 160 inch <br /> Size C: Not less than . 165 inch <br /> Carts shall be suitable for use in temperature of >120° F to <br /> -20°F. All plastic and component parts used in the <br /> construction of the carts shall be recyclable into other <br /> polyethylene products. Crosslink resin is not acceptable. <br /> All carts shall be manufactured with a minimum of 20% post <br /> consumer recycle content. <br /> Carts shall be manufactured with a UV stabilizer. The UV <br /> stabilizer shall be added in the solution during the <br /> polymerization, prior to pelletizing, compounding and molding. <br /> Independent laboratory tests of the carts bid must accompany <br /> bid samples certifying compliance as specified in part 2 of <br /> the detailed specifications. <br />