Laserfiche WebLink
seconds. Carts shall remain watertight and functional beyond 6,000 cycles. Test <br />loads are as follows: <br />Size A: <br />160 lbs. distributed <br />Size B: <br />250 lbs. distributed <br />Size C: <br />350 lbs. distributed <br />7.3 Wheel /.Axle Test - shall verify the combined durability of the wheels, axle and cart <br />axle supports under fully loaded conditions, The two cycle tests shall be performed <br />at room temperature as follows: <br />Cycle 1 - with a rolling length of 75 feet and a 5" curb drop. Cart shall continue to <br />roll freely and be watertight after 1,000 drops. <br />Cycle 2 - repeated with a 5,5" stair drop. Cart shall continue to roll freely and be <br />watertight after 1,000 drops. <br />Test loads shall be as follows: <br />Size A: <br />1251bs. distributed <br />Size B: <br />2001bs. distributed <br />Size C: <br />350tbs. distributed <br />7.4 Salt Spray - ASTM B117 -90 corrosion tests shall be applied to the lift bracket for <br />a minimum of 96 hours end to the axle for a minimum of 500 hours. Bracket and <br />axle shall remain corrosion free. <br />8, Serial Nu nber /Manufacture Date: Each cart shall be hot stamped with a seven digit, 1 -1/2" <br />high alpha/numeric identification number on the front of the cart. An in- molded year /month <br />date wheel identification will be located on the bottom of the cart. <br />9. Markings: Each cart lid shall be clearly and permanently marked with the cart's size or <br />volume capacity. <br />9,1 Precautionary instructions shall be molded into the lids in English and Spanish as <br />follows: <br />Size A: Cart Capacity 35 Gallons <br />Do not overload or you may have difficulty controlling the cart, <br />Do not roll cart with lid open. <br />Do not put sand, soil, rocks or concrete in cart, <br />Maximum load 125 pounds. <br />Do not put anything hot such as ashes in the cart. <br />Do not part paints, solvents, gasoline, oil, etc. in cart. <br />38 <br />65A -49 <br />