25L - AGMT HVAC AIR-HANDLING SYSTEMS REPLACEMENT AT SNA REG TRANS CENTER

Home Browse Search

The existing Siemens EMS control points for all equipment relevant to this project shall be maintained and verified when construction is completed. A new oil/off status control point(s) shall be incorporated into the existing Siemens EMS for the new VFD control. • Additional Siemens control points are to be determined by the City. Now Controls System — Pricing to be provided by Contractor as Option D Contractor is to provide this pricing as incremental cost, In other words, the cost beyond Base Option. • The Contractor is to provide equipment that is compatible with DDC Siemens management system (Insight or newer) • Replace the fan coil controllers on remaining (20) units with new DDC controllers that were not covered in the Base Option. The quantity of (20) remaining £air coils is to be verified by the Contractor • The Contractor will famish new DDC chilled water valves and DDC beating hot water controls valves for remaining (20) fan coil units that were not covered in the Base Option. • The Contractor will ilirnish new DDC zone temperature sensors for units • The Contractor will upgrade the existing Siemens controller (or provide new, as needed) and upgrade graphics and programming, as needed • Contractor to provide water balancing report to City • System startup and commissioning • The new controls system will integrate All HVAC building systems, including all fan coil Additional (2 ran Coil Replacement — Priciu > to be orovidecl by Contractor as Option E Contractor is to provide this pricing as incremental cost. In other words, the cost beyond Base Option. Contractor to replace (2) additional fan coil units, 116 and #18 which serve suite 103. These additional (2) fan coil units are to be installed in accordance to all scope items for the fail coils identified in the Base Option. City of Santa Flna RFP 47-056 Page At -4 25L-53