WKE, INC. (3)-2017 - Laserfiche WebLink

Home Browse Search

F. PLANS, SPECIFICATIONS, AND ESTIMATES (PS&E) 1. Development of Detail Plans, Specifications and Estimate (PS&E): a) Design of the bridge shall include a process for architectural treatments that will include developing some form of aesthetic development procedure for the barrier railings and lights. b) Constructability issues of the work shall be evaluated and addressed. Some issues to address may include access to the site for heavy equipment, construction phasing and sequential demolition of bridge railing (no work shall be performed within the river bottom during the rainy season), vehicular and bicycle traffic detouring issues or concerns, potential impacts false -work may have on the Santa Ana River in storm flows during construction, and protective measurement to prevent any day/night camping under the bridge. c) All reports, plans, specifications and quantity calculations shall conform to criteria, policies, procedures and standards of Caltrans and the City, and shall be made available to the City at stages specified in the milestone schedule and upon request. Consultant shall submit backup calculations for the project quantities. d) The bridge plans shall include at a minimum a general plan, structure demolition plans, and bridge details plans and sections. The plans shall also include utility relocation plans, barrier rails with architectural details, electrical lighting, landscaping/irrigation, and civil design, including sidewalk, approach, and County of Orange access roadway/bike trail where necessary. e) The street widening plans shall include a minimurn of a general street improvement plan layout, profile, disposition, landscaping and irrigation, typical section, and construction details. The plans shall show existing utilities and shall include at a minimum traffic signing, striping and pavement marking for the entire project limit. f) Each plan sheet shall bear the State of California Registered Professional Engineer registration seal within signatures, license number and registration certificate expiration date of the Engineer who is in responsible charge for developing the plan. Each plan sheet shall be signed by the engineer who performed the independent plan check. g) The calculations for both the design and the independent design check shall be submitted as part of the PS&E submittal requirements. The respective calculations shall bear the State of California Registered Professional Engineer registration seal with the signature, license number and registration certificate expiration date of the design engineer and independent check engineer. h) Consultant shall prepare complete contract specifications based on City of Santa Ana Special Provision, and the Standard Specifications for Public Works Construction (Greenbook). Structure construction shall follow the Caltrans Standard Specification. Consultant shall use the latest Caltrans Standard Specification. City of Santa Ana RFP 17-074 Page Al -3