25C - AGMT - WATER SYSTEM - Laserfiche WebLink

Home Browse Search

CITY OF SANTA ANA RFP NO.: 17-087 WATER SYSTEM CONTROL DESIGN, PROGRAMMING AND SUPPORT SERVICES and new components, such as control/PLC panels, with clear indication of new versus existing Bill of Materials of any new PLC modules of components required by the design project Control/PLC Panel Wiring Diagrams — Show all new and modified wiring required in the control panel, including wire numbers and colors, terminal numbers, and component tag numbers and/or description names. Include the panel end of field wires that terminate in the control panel for use by the electrical contractor that is responsible for pulling and terminating field wires into the control/PLC cabinets. Updated 1/0 list with existing and new point locations and addresses. The Consultant shall be responsible to provide on-call control system programming in ladder logic, function blocks, and structured text in the following programming languages: Concept v 2.6 Unity Vijeo Designer Visilogic The Consultant shall also be familiar with programming ABB VFD drives, PID loop controls programming (to be programmed in the PLC, not the VFD), and other related duties as assigned. All programming activities shall be documented, appropriately annotated within the coding and coordinated/approved witb/by the City's designated change manager. As a part of any programming task, the Consultant shall be expected to perform any or all of the following: • Develop loop diagrams for all UO connections to the PLC showing connections between the PLC Panel and the remote instruments or equipment. • Prepare a software submittal. • Include new communication to VFD's, power monitors, and equipment control panels. • Develop Factory and Site Acceptance testing plans to be submitted to the City for review and approval. • Execute the test plan to the satisfaction of the City. • Perform PLC UO software functional testing. • Provide a software operations and maintenance manual covering the developed software. • Prepare record drawings. • Perform planning, monitoring, configuration, troubleshooting, backup and repair of control system hardware and/or software. TROUBLESHOOTING. REPAIR AND MAINTENANCE: Consultant shall conduct troubleshooting and repair of electrical control systems, instrumentation equipment, communication gaps, and software as required to keep the SCADA control systems in proper working order. Consultant shall inform or make recommendations to City of all applicable software updates, licenses, or programming that would benefit or improve the City's SCADA control systems. With City approval, Consultant shall install the recommended software/hardware upgrades or make modifications as necessary and agreed upon to improve the systems as described. Page 2 of 3 25C-14